< Back ×
My Vehicle Change Vehicle
2007 Buick Rendezvous
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
Centric® Premium Brake Master Cylinder for 2007 Buick Rendezvous
PartNumber: 130.62121Product Specifications- UPC: 805890167525
- Part Description: 2007 Buick Rendezvous Premium Brake Master Cylinder
Vehicle Fitment- 2007 Buick Rendezvous | All Trims | All Engines
$69.05
OEM (Genuine) 2007 Buick Rendezvous Cylinder Asm, Brake Master
PartNumber: 19209264
Product Specifications- Other Names: Master Cylinder
- Item Dimensions: 9.4 x 7.6 x 9.2 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18060786, 18045967, 18044392
- Part Description: 2007 Buick Rendezvous Cylinder Asm, Brake Master
Vehicle Fitment- 2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
Cardone Reman® Remanufactured Master Cylinder for 2007 Buick Rendezvous
PartNumber: 10-3104Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter (N): 1.00"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder, Reservoir Pin Kit
- Port Quantity: 2
- Primary Port Size: 1/2 x 20
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: 1/2 x 20
- UPC: 082617687294
- Part Description: 2007 Buick Rendezvous Remanufactured Master Cylinder
Vehicle Fitment- 2007 Buick Rendezvous | All Trims | All Engines
FAQ for Brake Master Cylinder Repair
Q: How to remove the master cylinder reservoir?
A:
You can remove the master cylinder, clamp the flange, and drive out the spring pins. Then you need to remove the reservoir body and the O-rings. After inspecting the reservoir for cracks or deformation, you can clean and dry the reservoir.
By Bob
GM Specialist
01/11/2022Q: How to remove the brake master cylinder?
A:
You can disconnect brake pipes from the master cylinder and disconnect the fluid level sensor electrical connector. Then you can remove the master cylinder mounting nuts and the master cylinder. After that, you need to drain the master cylinder reservoir of all brake fluid and remove the master cylinder reservoir.
By Bob
GM Specialist
01/11/2022Q: How to install the master cylinder?
A:
You need to clean the master cylinder, the secondary piston, and the return spring. Then you can dry the master cylinder and the individual components, lubricate the master cylinder bore, assemble the lubricated, new primary seal and retainer, and new secondary seal onto the secondary piston. After that, you can install the lubricated return spring, the secondary piston assembly, and the lubricated, new primary piston assembly. After that, you can install the master cylinder reservoir, the reservoir cap and diaphragm, and the master cylinder.
By Bob
GM Specialist
01/11/2022Q: How to remove the master cylinder?
A:
You can remove the brake master cylinder from the vehicle. Then you need to secure the mounting flange of the brake master cylinder, clean the outside of the master cylinder reservoir, and remove the reservoir cap and diaphragm from the reservoir. Then you can remove the master cylinder reservoir and primary piston assembly. After that, you can plug the cylinder inlet ports and the rear outlet port, and discard the primary piston assembly, the piston retainer, and the seals and seal retainer.
By Bob
GM Specialist
01/11/2022Q: How to install the brake master cylinder?
A:
You can install the master cylinder reservoir, the master cylinder, and the master cylinder mounting nuts. Then you need to connect the fluid level sensor electrical connector and the brake pipes. After that, you can fill the master cylinder reservoir with brake fluid and bleed the brake system.
By Bob
GM Specialist
01/11/2022Q: How to install the master cylinder reservoir?
A:
You can lubricate the new O-rings and the reservoir-to-housing fittings. Then you can insert the O-rings into the grooves and install the reservoir, the spring pins, and the master cylinder.
By Bob
GM Specialist
01/11/2022See more FAQs (1)