2007 Buick Rendezvous Control Arm Bushing

You need to align the flat edge of the bushing flange to the mark, insert the bushing into the control arm, and assemble the bushing tools. Then you need to tighten the J 21474-4, disassemble the bushing tools, and install the lower control arm.

You need to raise and support the vehicle before removing the wheel and tire assemblies and supporting the lower control arm. Then you can remove the coil spring, the lower control arm, and the bushing.

You need to remove the lower control arm and secure the lower control arm. Then you need to mark the lower control arm, assemble the bushing tools, tighten the J 21474-4, and disassemble the bushing tools.

You need to install the bushing, the lower control arm, and mounting bolts. Then you can install the coil spring, and the tire and wheel assemblies. After inspecting the rear camber and toe angles, you can lower the vehicle.