< Back ×
My Vehicle Change Vehicle
2007 Buick Rendezvous
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Brands
- Prices
OEM (Genuine) 2007 Buick Rendezvous Crankshaft Balance
PartNumber: 12621646
Product Specifications- Notes: 3.5 Liter; Rendezvous
- Item Dimensions: 9.0 x 8.7 x 3.4 inches
- Item Weight: 5.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12588034, 12581298
- Part Description: 2007 Buick Rendezvous Crankshaft Balance
Vehicle Fitment- 2007 Buick Rendezvous | CX, CXL | 6 Cyl 3.5 L GAS
$83.94 MSRP:$138.89You Save: $54.95 (40%)
Dorman® OE Solutions Regular Grade Type Harmonic Balancer Assembly Kit for 2007 Buick Rendezvous
PartNumber: 594-266Product Specifications- Color/Finish: Black
- Degree Markings: No
- Depth: 40.3 mm
- Drive Belt Type: Serpentine
- Grade Type: Regular
- Inside Diameter: 31.8 mm
- OE Part Number: 12555691, 12561513, 12581298, 12588034, 12621646, 621646
- Outside Diameter: 167 mm
- Pulley Groove Quantity: 6
- UPC: 019495238256
- Part Description: 2007 Buick Rendezvous OE Solutions Regular Grade Type Harmonic Balancer Assembly Kit
Vehicle Fitment- 2007 Buick Rendezvous | All Trims | 6 Cyl 3.5L
$67.71
Dayco® PREMIUM OEM REPL BALANCER, POWERBOND for 2007 Buick Rendezvous
PartNumber: PB1544NProduct Specifications- Bolt Hole Quantity: 0
- Counterweight Balance: Neutral, no counterweight
- Crank Bore: 1.245; 31.60
- Crank Trigger/Exciter Plate: No
- Hardware Included: No
- Installation Instructions Included: No
- Nose Outside Diameter: 1.763; 44.78
- Number of Integrated Pulleys: 1
- Outer Ring Material: Cast Iron
- Overall Outside Diameter: 167.00; 6.575
- Overall Width: 1.701; 43.20
- Pulley 1 Number Of Grooves: 6
- Pulley 1 Outside Diameter: 163.300; 6.430
- Pulley 1 Type: Serpentine
- Ring Width: 1.260; 31.98
- Timing Marks: No
- Woodruff Key Included: No
- Part Description: 2007 Buick Rendezvous PREMIUM OEM REPL BALANCER, POWERBOND
Vehicle Fitment- 2007 Buick Rendezvous | All Trims | All Engines
$80.52
FAQ for Harmonic Balancer Repair
Q: How to remove the crankshaft balancer?
A:
After removing the drive belt, the right front tire and wheel, and the right engine splash shield, you can install the jack stands. Then you can loosen the left frame bolts and remove the right-side frame bolts. After that, you can remove the torque converter cover, remove the crankshaft balancer bolt, the washer, and the crankshaft balancer.
By Bob
GM Specialist
01/11/2022Q: How to install the crankshaft balancer?
A:
After applying the sealant, you can install the crankshaft balancer and remove the J 29113. Then you can install the J 43442, the crankshaft balancer washer, and the bolt. After that, you can remove the J 43442, install the torque converter cover, and raise the frame. Then you can install the frame bolts, the right engine splash shield, the right front tire and wheel, and the drive belt.
By Bob
GM Specialist
01/11/2022