< Back ×
2007 Buick Terraza A/C Receiver Drier
My Vehicle Change Vehicle
2007 Buick Terraza
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
$19.71Product Specifications- Body Diameter: 1.750
- Body Length: 10.000
- Connector B Type: Pad Mount
- Connector Type: Pad Mount
- Desiccant: Yes
- Desiccant Replaceable: Not Replaceable
- Dia. MM: 44.450
- Gasket / Seals: Included
- In Line Filter Material: Desiccant
- In Line Filter Outlet Fitting Type: Pad Mount
- Inlet Filter Fitting Type: Male
- Inlet Fitting Diameter: .402
- Inlet Fitting Type: Pad Mount
- Inlet Fraction: 3/8
- Length MM: 254.000
- Material: Aluminum
- Meets / Exceeds OEM: Yes
- Mounting Bracket Included: Hardware not included
- O-Ring A Number/Desc: [24611] / Green O-Ring
- Outlet Fitting Type: Pad Mount
- Outlet Fraction: 3/8
- Outlet IN: .402
- Overall Depth IN: 10.000
- Overall Depth MM: 254.000
- Pad Mount: w/ Pad Mount
- Service Port: w/o Service Port
- Sight Glass: No
- Style: Aluminum Filter Drier w/ Pad Mount
- Switch Port: w/o Switch Port
- UPC: 096361832374
- Part Description: 2007 Buick Terraza Aluminum Filter Drier w/ Pad Mount
Vehicle Fitment- 2007 Buick Terraza | All Trims | All Engines
OEM (Genuine) 2007 Buick Terraza Drier
PartNumber: 10327446$21.56 MSRP:$40.70You Save: $19.14 (48%)Product Specifications- Notes: 3.9 Liter; Terraza, Uplander; 3.9l
- Other Names: Dehydrator, Drier
- Item Dimensions: 11.2 x 3.3 x 3.3 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Terraza Drier
Vehicle Fitment- 2007 Buick Terraza | CX, CXL | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
Product Specifications- Notes: OE recommended replacement part.
- Body Diameter: 44.450
- Body Length: 254.000
- Inlet Fitting Type: FEMALE
- Material: Aluminum
- New or Remanufactured: NEW
- Outlet Fitting Type: FEMALE
- UPC: 042511222144
- Part Description: 2007 Buick Terraza A/C Receiver Drier
Vehicle Fitment- 2007 Buick Terraza | All Trims | 6 Cyl 3.9L
FAQ for A/C Receiver Drier Repair
Q: How to remove the Receiver Dryer?
A:
You can remove the A/C condenser, tape the open A/C lines, remove the receiver dehydrator upper bracket screw, the receiver dehydrator lower bolts, the receiver dehydrator, discard the receiver dehydrator lower sealing washers, and tape the condenser lower openings.
By Bob
GM Specialist
28/10/2022Q: How to install the Receiver Dryer?
A:
You can add the specified amount of PAG oil directly to the receiver dehydrator, remove the cap or tape, install new lower receiver dehydrator sealing washers, the receiver dehydrator, the receiver dehydrator lower bolts, the receiver dehydrator upper bracket screw, remove the caps or tape from the open A/C lines, and install the A/C condenser.
By Bob
GM Specialist
28/10/2022