2007 Buick Terraza Brake Master Cylinder Bleeder Tool

You can turn the ignition switch to the off position, remove all 4 tires, connect the pressure bleeding tool, establish communications with the ABS, and pressurize the bleeding tool to 206-241 kPa (30-35 psi).

The Auto Bleed Procedure may be terminated at any time during the process by pressing the EXIT button. No further Scan Tool prompts about the Auto Bleed procedure will be given. After exiting the bleed procedure, relieve bleed pressure and disconnect bleed equipment per the manufacturer's instructions.

The procedure is to secure the mounting flange of the brake master cylinder in a bench vise so that the rear of the primary piston is accessible, remove the master cylinder reservoir cap and diaphragm, install suitable fittings to the master cylinder ports that match the type of flare seat required and also provide for hose attachment, transparent hoses to the fittings installed to the master cylinder ports, then route the hoses into the master cylinder reservoir, fill the master cylinder reservoir to at least the half-way point, remove the transparent hoses from the master cylinder reservoir, install the master cylinder reservoir cap and diaphragm, remove the fittings with the transparent hoses from the master cylinder port, and the master cylinder from the vise.