2007 Buick Terraza Coil Springs

You can install the knuckle to the vehicle, the bolts which connect the strut to the knuckle, the outer tie rod to the Steering Knuckle, the front lower control arm ball stud to the knuckle, the front wheel drive shaft bearing, and the tire and wheel assembly.

You can lock the steering column, position the intermediate Steering Shaft seal, remove the intermediate steering shaft lower pinch bolt, disconnect the intermediate steering shaft, remove the left sound insulator, the intermediate steering shaft seal, the intermediate steering shaft upper pinch bolt, the intermediate steering shaft, and the intermediate steering shaft.

You can relieve fuel line pressure, drain the cooling system, remove the coolant recovery reservoir, the left front cross brace, the engine control module (ECM) cover from the air cleaner housing, the ECM and set aside, the air cleaner assembly, the fuel lines, the heater hose, the fuel lines, the fluid level sensor switch, the brake lines, the master cylinder, the brake pressure modulator valve (BPMV) assembly and bracket, the Brake Booster vacuum hose, the knee bolster, the booster push pin retaining clip and washer, the brake booster push rod, the brake booster mounting nuts, the engine forward to gain access, and the brake booster.