2007 Buick Terraza Harmonic Balancer

You can apply a sealer to the keyway of the crankshaft balancer, place the crankshaft balancer into position over the key in the crankshaft, install the J 29113 onto the crankshaft, the hex nut on the J 29113 to install the crankshaft balancer onto the crankshaft, the frame to the original position using the adjustable jacks, tighten the right side frame bolts and tighten the left side frame bolts, the right engine splash shield, the right front tire and wheel, and the drive belt.

You can remove the drive belt, the right front tire and wheel, the right engine splash shield, the left side frame bolts, the engine to transmission bracket bolts at the rear lower left side of the engine and transaxle assembly, the engine to transmission bracket from the rear lower left side of the engine and transaxle assembly, the torque converter cover, install the J 37096 to the flywheel to prevent flywheel rotation, remove the crankshaft balancer bolt and the washer, and remove the crankshaft balancer using the J 41816.