< Back ×
My Vehicle Change Vehicle
2007 Buick Terraza
< Back to View All
Suspension System Components
- Department
- Prices
OEM (Genuine) 2007 Buick Terraza Sensor
PartNumber: 10307709
Product Specifications- Notes: Terraza, Uplander
- Other Names: Sensor, Yaw Rate Sensor, Yaw Sensor
- Item Dimensions: 6.2 x 3.2 x 3.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Terraza Sensor
Vehicle Fitment- 2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
$130.90 MSRP:$247.00You Save: $116.10 (48%)
OEM (Genuine) 2007 Buick Terraza Rear Sensor
PartNumber: 88964311
Product Specifications- Notes: W/O AWD; Terraza, Uplander
- Other Names: Level Sensor, Rear Sensor, Sensor
- Item Dimensions: 8.8 x 5.1 x 5.0 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89047638
- Part Description: 2007 Buick Terraza Rear Sensor
Vehicle Fitment- 2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
FAQ for Ride Height Sensor Repair
Q: How to install the Automatic Level Control Sensor?
A:
You can install the ALC sensor to the vehicle, the height sensor bracket bolts, the ALC sensor link onto the sensor arm ball stud, the ALC height sensor electrical connector, and lower the vehicle.
By Bob
GM Specialist
02/11/2022Q: How to remove the Automatic Level Control Sensor?
A:
You can remove the ELC/TRAILER fuse, the automatic level control (ALC) sensor electrical connector, the ALC sensor link from the sensor arm ball stud, the ALC sensor bracket bolts, and the ALC sensor from the vehicle.
By Bob
GM Specialist
02/11/2022Q: How to remove the Automatic Level Control Sensor Link?
A:
You can raise and support the vehicle and remove the sensor link from the ball studs on the sensor and control arm.
By Bob
GM Specialist
02/11/2022Q: How to install the Automatic Level Control Sensor Link?
A:
You can position the ELC sensor link to the ball studs on the sensor and control arm, press the ELC sensor link ends onto the ball studs until fully seated, and lower the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the height sensor bolts/screws?
A:
The recommended torque is 12 N.m (106 lb in).
By Bob
GM Specialist
02/11/2022