< Back ×
My Vehicle Change Vehicle
2007 Cadillac DTS
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
Centric® Premium Brake Master Cylinder for 2007 Cadillac DTS
PartNumber: 130.62142Product Specifications- Notes: Hearse & Limo
- UPC: 805890100591
- Part Description: 2007 Cadillac DTS Premium Brake Master Cylinder
Vehicle Fitment- 2007 Cadillac DTS | All Trims | All Engines
$79.12
Centric® Premium Brake Master Cylinder for 2007 Cadillac DTS
PartNumber: 130.62141Product Specifications- Notes: Exc Hearse & Limo
- UPC: 805890100584
- Part Description: 2007 Cadillac DTS Premium Brake Master Cylinder
Vehicle Fitment- 2007 Cadillac DTS | All Trims | All Engines
$73.24
OEM (Genuine) 2007 Cadillac DTS Cylinder Asm, Brake Master
PartNumber: 19209200
Product Specifications- Other Names: Master Cylinder
- Item Dimensions: 9.1 x 9.3 x 8.2 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15283583
- Part Description: 2007 Cadillac DTS Cylinder Asm, Brake Master
Vehicle Fitment- 2007 Cadillac DTS | Base, Luxury, Platinum | 8 Cyl 4.6 L GAS
Cardone Reman® Remanufactured Master Cylinder for 2007 Cadillac DTS
PartNumber: 10-3282Product Specifications- Notes: GM Brake Codes are on the "Service Parts Identification" sticker.;GM Brake Code JL9;Supplied w/o Reservoir
- Bore Diameter (N): 1.00"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder, Reservoir Pin Kit
- Port Quantity: 2
- Primary Port Size: M13 x 1.5
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: M13 x 1.5
- UPC: 082617781626
- Part Description: 2007 Cadillac DTS Remanufactured Master Cylinder
Vehicle Fitment- 2007 Cadillac DTS | All Trims | All Engines
OEM (Genuine) 2007 Cadillac DTS Cylinder Kit, Brake Master
PartNumber: 18042795
Product Specifications- Notes: Dts; W/Heavy Duty
- Item Dimensions: 13.6 x 13.7 x 13.4 inches
- Item Weight: 3.00 Pounds
- Part Description: 2007 Cadillac DTS Cylinder Kit, Brake Master
Vehicle Fitment- 2007 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
FAQ for Brake Master Cylinder Repair
Q: What is the proper way to install the Master Cylinder Reservoir?
A:
The proper way is to install the seals and the reservoir onto the master cylinder after the reservoir is cleaned and dried.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Master Cylinder Reservoir?
A:
The procedure is to remove the master cylinder, the master cylinder fluid level sensor, the master cylinder reservoir, and the seals.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Master Cylinder Fluid Level Sensor?
A:
The proper way is to align the brake fluid level sensor to the master cylinder reservoir, press the brake fluid level sensor into the master cylinder reservoir, and then connect the electrical connector to the brake fluid level sensor.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the brake pipe nuts?
A:
The recommended torque is 29 Nm (21 LB ft).
By Bob
GM Specialist
01/11/2022Q: What should be noticed when adding fluid to the brake master cylinder reservoir?
A:
When adding fluid to the brake master cylinder reservoir, use only Delco Supreme 11(R), GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT 3 brake fluid from a clean, sealed brake fluid container.
By Bob
GM Specialist
01/11/2022Q: What should be done if the brake fluid is to be added to the master cylinder reservoir?
A:
You should clean the outside of the reservoir on and around the reservoir cap before removing the cap and diaphragm.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when adding fluid to the brake master cylinder reservoir?
A:
When adding fluid to the brake master cylinder reservoir, you should use only Delco Supreme 11(R), GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT 3 brake fluid from a clean, sealed brake fluid container.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Master Cylinder Fluid Level Sensor?
A:
The procedure is to disconnect the electrical connector, and then depress the retaining tabs on the end of the brake fluid level sensor, and press the sensor through the reservoir to remove it.
By Bob
GM Specialist
01/11/2022Q: Why should the mounting flange of the brake master cylinder be secured in a bench vise?
A:
It's to make the rear of the primary piston accessible.
By Bob
GM Specialist
01/11/2022Q: How many nuts does a brake pipe need?
A:
Abrake pipe needs 2 nuts.
By Bob
GM Specialist
01/11/2022See more FAQs (6)