< Back ×
2007 Cadillac Escalade ESV Driveshaft
My Vehicle Change Vehicle
2007 Cadillac Escalade ESV
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2007 Cadillac Escalade ESV
PartNumber: 65-1010$402.94Product Specifications- Notes: w/61 15/16" (1574 mm) Prop Shaft; Supplied as new; Measurement is taken from end of input shaft to center of U-Joint
- Drive Shaft Material: Steel
- E-Waste: No
- Greasable: No
- Length (in): 61.937
- Length (mm): 1574
- Measurement Method: Measurement is Taken from End of Input Shaft to Center of U-Joint
- Product Condition: New
- Tubing Outer Diameter (in): 3.500
- Tubing Outer Diameter (mm): 89
- Part Description: Remanufactured Driveshaft/ Prop Shaft
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2007 Cadillac Escalade ESV
PartNumber: 65-1016$314.46Product Specifications- Notes: with 34-7/8" (886 mm) Long Driveshaft;Supplied as new; Measurement is taken from end of input shaft to center of U-Joint
- Drive Shaft Material: Steel
- E-Waste: No
- Greasable: No
- Length (in): 34.875
- Length (mm): 886
- Measurement Method: Measurement is Taken from End of Input Shaft to Center of U-Joint
- Product Condition: New
- Tubing Outer Diameter (in): 2.75
- Tubing Outer Diameter (mm): 70
- Part Description: Remanufactured Driveshaft/ Prop Shaft
$307.11 MSRP:$508.32You Save: $201.21 (40%)Product Specifications- Other Names: Axle Assembly
- Item Dimensions: 28.5 x 7.3 x 7.3 inches
- Item Weight: 19.80 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 85083496
- Part Description: Axle Assembly
$511.72 MSRP:$846.94You Save: $335.22 (40%)Product Specifications- Notes: 1/2 Ton, 8.625 Ring Gear
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 7.5 x 7.2 x 36.0 inches
- Item Weight: 28.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15286380
- Part Description: Axle Shafts
$300.24 MSRP:$522.56You Save: $222.32 (43%)Product Specifications- Notes: 1/2 Ton, 9.50 Ring Gear
- Location: Driver Side; Passenger Side
- Other Names: Axle, Axle Shaft
- Item Dimensions: 7.3 x 7.5 x 36.3 inches
- Item Weight: 25.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15812663
- Part Description: Rear Axle Shaft
$366.47 MSRP:$493.91You Save: $127.44 (26%)Product Specifications- Notes: 4WD, 1/2 Ton, W/O AWD
- Location: Passenger Side
- Other Names: Inner Shaft, Output Shaft
- Item Dimensions: 17.6 x 6.6 x 6.4 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: Inner Shaft
Product Specifications- Notes: Escalade Esv; 6 Speed Myc (6l80)
- Other Names: Drive Shaft
- Item Dimensions: 64.2 x 3.9 x 3.8 inches
- Item Weight: 20.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: Propeller Shaft Assembly
Product Specifications- Notes: 4WD, 1/2 Ton, W/AWD;4WD, 1/2 Ton, W/O AWD
- Location: Driver Side
- Other Names: Axle Shaft, Inner Shaft, Outer Shaft, Output Shaft
- Item Dimensions: 8.4 x 7.8 x 10.5 inches
- Item Weight: 4.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26059717
- Part Description: Outer Shaft
Product Specifications- Notes: 4WD, 1/2 Ton, W/AWD
- Location: Passenger Side
- Other Names: Inner Shaft, Output Shaft
- Item Dimensions: 22.8 x 6.5 x 6.8 inches
- Item Weight: 9.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: Front Drive Axle Inner Shaft
FAQ for Driveshaft Repair
Q: How do you install the Rear Propeller Shaft?
A:
You need to inspect the splines of the slip yoke for a sufficient coating of lubricant, install the propeller shaft into the transmission or transfer case, align the reference marks made during removal, install the propeller shaft to the rear axle pinion yoke, align the reference marks made during removal, install the yoke retainers and bolts and lower the vehicle.
By Bob
GM Specialist
29/10/2022Q: How do you install the front propeller shaft?
A:
You need to inspect the splines of the transfer case output shaft for a sufficient coating of lubricant, install the propeller shaft boot, the propeller shaft boot clamp, the propeller shaft splines into the transfer case output shaft, the propeller shaft to the front axle pinion yoke, the yoke retainers and the bolts and the boot onto the transfer case output shaft until the boot snaps into the groove on the output shaft. Then you can use the J 43218 to crimp both clamps and install the transfer case shield.
By Bob
GM Specialist
29/10/2022Q: How do you remove the front propeller shaft?
A:
You need to remove the transfer case shield, and the clamp at the transfer case by prying up the exposed end of the clamp with a flat-bladed tool and the bolts and the yoke retainers from the front axle pinion yoke, disconnect the propeller shaft from the front axle pinion yoke, use tape to secure the bearing caps and remove the boot from the groove on the transfer case output shaft, the propeller shaft from the transfer case output shaft by sliding the propeller shaft forward, the clamp from the propeller shaft boot and the propeller shaft boot from the propeller shaft.
By Bob
GM Specialist
29/10/2022Q: How do you remove the Rear Propeller Shaft?
A:
You need to remove the bolts and the yoke retainers from the rear axle pinion yoke, slide the propeller shaft forward to disconnect the propeller shaft from the rear axle pinion yoke, and the propeller shaft rearward to disconnect the propeller shaft from the transmission or transfer case and remove the propeller shaft from the vehicle.
By Bob
GM Specialist
29/10/2022