< Back ×
My Vehicle Change Vehicle
2007 Cadillac Escalade ESV
< Back to View All
Wheel Hubs, Bearings & Seals
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2007 Cadillac Escalade ESV Front Wheel Bearing (W/ Bearing & Wheel Speed Sensor)
PartNumber: 84356643
Product Specifications- Notes: Escalade Esv; 4WD
- Other Names: Front Hub
- Item Dimensions: 9.2 x 8.6 x 6.8 inches
- Item Weight: 13.30 Pounds
- Replaced by: 84856654
- Part Description: Front Wheel Bearing (W/ Bearing & Wheel Speed Sensor)
$232.37 MSRP:$461.06You Save: $228.69 (50%)
Dorman® OE Solutions Front Driver Side Wheel Bearing And Hub Assembly for 2007 Cadillac Escalade ESV
PartNumber: 930-611Product Specifications- Bearing Generation: Gen 2
- Hub Centerbore Diameter (in): 1.53"
- Hub Diameter (in): 7.05"
- Hub Material: Steel
- Lug Pattern: 6
- Mount Hole Diameter: 0.49"
- Mount Hole Quantity: 3
- Mounting Flange Material: Steel
- Mounting Flange Thickness: 0.44"
- OE Part Number: 10393171, 22841381, 25918329, 25976819
- Package Contents: Hub Bearing Assembly
- Sensor Wiring Harness Length: 23.5"
- UPC: 885484572652
- Wheel Speed Sensor Attached: No
- Width: 3 In.
- Part Description: OE Solutions Front Driver Side Wheel Bearing And Hub Assembly
$99.03
Centric® Premium™ Front Driver Side Driven Wheel Bearing and Hub Assembly for 2007 Cadillac Escalade ESV
PartNumber: 402.66016Product Specifications- Notes: Front Bracket Cast# 285C/286C
- UPC: 805890619390
- Part Description: Premium™ Front Driver Side Driven Wheel Bearing and Hub Assembly
$131.98
SKF® Front Passenger Side Wheel Bearing And Hub Assembly for 2007 Cadillac Escalade ESV
PartNumber: BR930661Product Specifications- Notes: X-Tracker Hybrid
- Bolt Circle Diameter A: 5.50"
- Bolt Circle Diameter B: 4.96"
- Bolt Hole Size: 0.4755
- Bolt Size: M14X1.5
- Flange Diameter: 7.0472"
- Flange Offset: 1.9488"
- Number of Bolts: 6
- Number of Holes: 3
- Number of Splines: 33
- Sensor Ring: Yes
- UPC: 085311457330
- Wheel Pilot Diameter: 3.0622"
- Part Description: Front Passenger Side Wheel Bearing And Hub Assembly
$162.54
Quality-Built® WHEEL BEARING AND HUB ASSEMBLY for 2007 Cadillac Escalade ESV
PartNumber: WH515096Product Specifications- Notes: Wheel Hub Assy; Axle Nut Torque Spec: 177 ft-lbs / 240Nm
- Flange Diameter (Inch): 7.051
- Gasket or Seal Included: Yes
- Greaseable: No
- Hub Pilot Diameter (Inch): 3.9
- Material: Steel
- Product Condition: New
- Spline Quantity: 33
- Stud Quantity: 6
- UPC: 029175922696
- Wheel Stud Size MM: M14 x 1.5
- Wiring Harness Included: No
- Part Description: WHEEL BEARING AND HUB ASSEMBLY
$81.50
OEM (Genuine) 2007 Cadillac Escalade ESV HUB ASM-FRT WHL (W/ BRG & WHL SPD SEN)
PartNumber: 84856654
Product Specifications- Notes: 4WD, 1/2 Ton; Escalade Esv; 4WD
- Location: Driver Side; Passenger Side
- Other Names: Front Hub, Hub & Bearing
- Item Dimensions: 12.2 x 10.5 x 8.3 inches
- Item Weight: 16.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 84356643, 22841381, 25918329, 25976819, 10393171
- Part Description: HUB ASM-FRT WHL (W/ BRG & WHL SPD SEN)
$232.37 MSRP:$461.06You Save: $228.69 (50%)
OEM (Genuine) 2007 Cadillac Escalade ESV Front Hub
PartNumber: 84856653
Product Specifications- Notes: 2WD, 1/2 Ton
- Location: Driver Side; Passenger Side
- Other Names: Front Hub, Hub & Bearing
- Fitment Type: Direct Replacement
- Replaces: 20883242, 84356642, 22841380, 25819677, 10393170
- Part Description: Front Hub
$245.68 MSRP:$463.56You Save: $217.88 (48%)
FAQ for Wheel Hub Repair
Q: What should you do before replacing the Wheel Hub, Bearing, and Seal (1500 Series)?
A:
You need to raise and support the vehicle and remove the front tire and wheel assembly, the front brake rotor, and the wheel speed sensor from the wheel bearing/hub assembly.
By Bob
GM Specialist
02/11/2022Q: How do you install the Wheel Hub, Bearing, and Seal (2500 Series)?
A:
You need to clean all corrosion or contaminates from the steering knuckle bore and the hub and bearing assembly, lubricate the steering knuckle bore with wheel bearing grease or the equivalent, install the O-ring to the steering knuckle, the wheel speed sensor to the wheel hub and bearing, the wheel hub and bearing and splash shield to the vehicle, the wheel hub and bearing mounting bolts and the nut and washer retaining the wheel drive shaft assembly to the wheel hub and bearing, connect the electrical connection for the wheel speed sensor and install the wheel speed sensor and brake hose mounting bracket bolt to the steering knuckle, the rotor and the tire and wheel.
By Bob
GM Specialist
02/11/2022Q: What should be noticed when replacing the Front Wheel Bearing/Hub bolt?
A:
You need to remove the bolts from the wheel bearing/hub assembly.
By Bob
GM Specialist
02/11/2022Q: How many bolts does the Front Wheel Bearing/Hub have?
A:
It has a total of 3 bolts.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Wheel Hub, Bearing, and Seal (2500 Series)?
A:
You need to remove the tire and wheel, the rotor and the wheel speed sensor, and the brake hose mounting bracket bolt from the steering knuckle, disconnect the electrical connection for the wheel speed sensor, remove the wheel driveshaft nut retaining cover, wrap the shop towel around the inner and outer wheel drive shaft booth, remove the wheel driveshaft assembly retaining nut and washer from the wheel driveshaft assembly, the wheel hub and bearing mounting bolts, the wheel hub, and bearing and splash shield from the vehicle, the O-ring seal from the steering knuckle bore and the wheel speed sensor from the wheel hub and bearing and then clean and inspect the O-ring seal.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the Front Wheel Bearing/Hub?
A:
The recommended torque is 180 N.m (133 lb-ft).
By Bob
GM Specialist
02/11/2022See more FAQs (1)