< Back ×
2007 Cadillac Escalade ESV Windshield Wiper Motors
My Vehicle Change Vehicle
2007 Cadillac Escalade ESV
< Back to View All
Wipers & Washers
- Department
- Brands
- Prices
Dorman® OE Solutions Windshield Wiper Motor And Linkage Assembly for 2007 Cadillac Escalade ESV
PartNumber: 602-230AS$142.98Product Specifications- Bushing Material: Rubber
- Configuration: One Piece
- Driver Type: Mechanical
- Frame Material: Galvanized Steel
- Grade Type: Standard
- Length: 33 In.
- Material Thickness: 0.873 In.
- Mounting Hardware Included: No
- OE Part Number: 23328193, 25923882, 20837131, 23167072, 25877338, 15846942, 15779727, 25801064, 25875313, 25801063, 15940208
- Package Contents: 1 Wiper Transmission; 1 Motor
- Rotation Direction: Clockwise
- UPC: 889245866813
- Wiper Arm Pivot Point Diameter: 0.43 In.
- Part Description: OE Solutions Windshield Wiper Motor And Linkage Assembly
Product Specifications- Notes: with 6 Terminals;Motor without Washer Pump
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Direct Bolt/Grommet
- Product Condition: Remanufactured
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: Remanufactured Wiper Motor
Product Specifications- Notes: Motor without Washer Pump;with 5 Terminals
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Direct Bolt
- Product Condition: Remanufactured
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: Remanufactured Wiper Motor
Product Specifications- Item Dimensions: 38.1 x 7.5 x 6.2 inches
- Item Weight: 7.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15846942, 25923882
- Part Description: Module Asm, Windshield Wiper System
Product Specifications- Other Names: Rear Motor, Wiper Motor
- Item Dimensions: 12.6 x 7.0 x 8.3 inches
- Item Weight: 2.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25799536, 15282187
- Part Description: Motor Asm-Rear Window Wiper
Product Specifications- Notes: Motor without Washer Pump
- E-Waste: Yes
- Mounting Hole Quantity: 2
- Mounting Type: Eyelet, Grommet
- Package Contents: Wiper Motor, Instruction Manual
- Product Condition: Remanufactured
- Product Packing Weight: 3.25 lbs
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: Remanufactured Wiper Motor
FAQ for Windshield Wiper Motors Repair
Q: What is the recommended torque for the Windshield Wiper System Module Assembly?
A:
The recommended torque is 9 N.m (80 Ib in).
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Rear Window Wiper Motor?
A:
You need to remove the liftgate interior trim panel, the rear wiper arm assembly, and the rear wiper motor pivot shaft nut and spacer.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Rear Window Wiper Motor Assembly have?
A:
It has a total of 2 bolts.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Rear Window Wiper Motor Assembly?
A:
The recommended torque is 9 N.m (80 Ib in).
By Bob
GM Specialist
01/11/2022Q: What should be noticed when replacing the Windshield Wiper System Module Assembly?
A:
You need to raise the module and disconnect the electrical connector.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Air Inlet Grille Panel?
A:
You need to remove the fixed antenna, the windshield wiper arms, and the rear hood seal.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Wiper Motor Cover?
A:
You need to turn the ignition key to the OFF position, open the hood, remove the radio antenna, the wiper arms, the air inlet panel, and the connector position assurance (CPA) connector, disconnect the electrical connector from the wiper motor cover, and remove the 4 screws that secure the cover to the motor and the cover from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How many screws does the Air Inlet Panel have?
A:
It has a total of 2 screws.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Windshield Wiper System Module Assembly have?
A:
It has a total of 3 bolts.
By Bob
GM Specialist
01/11/2022Q: How do you install the Wiper Motor Cover?
A:
You need to position the cover to the wiper motor, install the 4 screws to the cover, connect the electrical connector and install the CPA, install the air inlet panel, the wiper arms, and the radio antenna and close the hood.
By Bob
GM Specialist
01/11/2022See more FAQs (7)