< Back ×
My Vehicle Change Vehicle
2007 Cadillac XLR
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2007 Cadillac XLR AC Tube
PartNumber: 22759527
Product Specifications- Other Names: AC Tube
- Item Dimensions: 42.1 x 21.6 x 9.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10385363, 10442893
- Part Description: 2007 Cadillac XLR AC Tube
Vehicle Fitment- 2007 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
$123.14 MSRP:$232.36You Save: $109.22 (48%)
OEM (Genuine) 2007 Cadillac XLR AC Line
PartNumber: 22783651
Product Specifications- Notes: 4.6 Liter
- Other Names: AC Line
- Item Dimensions: 32.1 x 9.0 x 8.8 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15251673, 10441359
- Part Description: 2007 Cadillac XLR AC Line
Vehicle Fitment- 2007 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2007 Cadillac XLR Hose Asm-A/C Compressor & Condenser
PartNumber: 10350993
Product Specifications- Notes: XLR; Condenser & Compressor
- Other Names: AC Hose, Pressure Hose
- Item Dimensions: 39.8 x 19.7 x 5.4 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Cadillac XLR Hose Asm-A/C Compressor & Condenser
Vehicle Fitment- 2007 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2007 Cadillac XLR Tube Asm-A/C Evaporator Thermal Expansion Valve Rear
PartNumber: 25777907
Product Specifications- Notes: 4.4 Liter
- Other Names: AC Line
- Item Dimensions: 29.6 x 13.3 x 11.4 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10346003, 15883327
- Part Description: 2007 Cadillac XLR Tube Asm-A/C Evaporator Thermal Expansion Valve Rear
Vehicle Fitment- 2007 Cadillac XLR | V | 8 Cyl 4.4 L GAS
FAQ for A/C Hose Repair
Q: How do you install the air conditioning line/tube connector?
A:
You can install the A/C coupling assembly to the A/C refrigerant component, close the A/C coupling assembly, evaporate and recharge the A/C system, and leak-test the fittings of the component.
By Bob
GM Specialist
28/10/2022Q: What is the first step of the removal procedure for the air conditioning evaporator rear tube?
A:
The first step is to recover the refrigerant from the A/C system.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque when installing the A/C compressor hose assembly to the A/C compressor retaining nut?
A:
You can tighten the nut to 20 N.m (15 lb-ft).
By Bob
GM Specialist
28/10/2022Q: What is the removal procedure for the air conditioning line/tube connector?
A:
You can recover the refrigerant from the A/C system, locate the A/C coupling assembly's locking tab access slots, insert a small flat-bladed screwdriver into the first locking tab access slot, insert a small flat-bladed screwdriver into the second locking tab access slot and open and remove the A/C coupling assembly.
By Bob
GM Specialist
28/10/2022Q: What should you do before removal?
A:
You should take note of the A/C compressor hose assembly routing and orientation between the compressor and condenser.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque when installing the front evaporator inlet line to the A/C condenser lower bolt?
A:
You can tighten the bolt to 16 N.m (12 lb-ft).
By Bob
GM Specialist
28/10/2022Q: What is the removal procedure for the air conditioning evaporator front tube?
A:
You can recover the refrigerant from the A/C system, remove the battery, disconnect and remove the A/C tube connector, disconnect the front evaporator inlet line, disconnect the refrigerant pressure sensor electrical connector, remove the front evaporator inlet line to the A/C condenser lower bolt, disconnect the front evaporator line inlet, remove the sealing washer, cap or tape off the A/C condenser, disconnect the front evaporator inlet line, remove the O-rings, cap or tape the evaporator rear line assembly, disconnect the surge tank outlet hose and the inlet heater hose and remove the front evaporator inlet line from the vehicle.
By Bob
GM Specialist
28/10/2022Q: What should you do to prevent contamination?
A:
You should immediately cap or tape the open A/C components.
By Bob
GM Specialist
28/10/2022See more FAQs (3)