< Back ×
My Vehicle Change Vehicle
2007 Cadillac XLR
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
Centric® Premium Brake Master Cylinder for 2007 Cadillac XLR
PartNumber: 130.62132Product Specifications- UPC: 805890510123
- Part Description: 2007 Cadillac XLR Premium Brake Master Cylinder
Vehicle Fitment- 2007 Cadillac XLR | All Trims | All Engines
$79.28
OEM (Genuine) 2007 Cadillac XLR Cylinder Asm, Brake Master
PartNumber: 19209259
Product Specifications- Other Names: Master Cylinder
- Item Dimensions: 9.4 x 9.3 x 8.2 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18060779
- Part Description: 2007 Cadillac XLR Cylinder Asm, Brake Master
Vehicle Fitment- 2007 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
Cardone Reman® Remanufactured Brake Master Cylinder for 2007 Cadillac XLR
PartNumber: 10-3107Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter (N): 1.00"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder, Reservoir Pin Kit
- Port Quantity: 2
- Primary Port Size: M12 x 1.0
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: M12 x 1.0
- UPC: 082617687508
- Part Description: 2007 Cadillac XLR Remanufactured Brake Master Cylinder
Vehicle Fitment- 2007 Cadillac XLR | All Trims | All Engines
FAQ for Brake Master Cylinder Repair
Q: What is the recommended torque when installing the master cylinder mounting nuts?
A:
You can tighten the master cylinder mounting nuts to 29 N.m (21 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the master cylinder?
A:
First, disconnect the electrical connector, disconnect the brake pipes from the master cylinder and plug the open brake pipe ends. Next, remove the master cylinder mounting nuts, remove the master cylinder from the vehicle and drain the master cylinder reservoir of all brake fluid.
By Bob
GM Specialist
01/11/2022Q: Should you add brake fluid if the brake fluid level is above the half-full point?
A:
No, adding brake fluid is not recommended under normal conditions.
By Bob
GM Specialist
01/11/2022Q: What is the recommended type of brake fluid when adding fluid to the brake master cylinder reservoir?
A:
You can use only Delco Supreme 11(R), GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
By Bob
GM Specialist
01/11/2022Q: What is the first step of the disassembly procedure for the master cylinder?
A:
The first step is to remove the brake master cylinder from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What should you clean before removing the cap and diaphragm?
A:
You should clean the outside of the master cylinder reservoir on and around the reservoir cap.
By Bob
GM Specialist
01/11/2022Q: What can be used to depress the retaining tabs on the end of the brake fluid level sensor and press the sensor through the reservoir to remove it?
A:
You can use needle nose pliers.
By Bob
GM Specialist
01/11/2022Q: When should the brake system be inspected for wear and possible brake fluid leaks?
A:
If the brake fluid level is at or below the half-full point during routine fluid checks, the brake system should be inspected for wear and possible brake fluid leaks.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the master cylinder reservoir?
A:
You can remove the master cylinder from the vehicle, remove the brake fluid level sensor, remove the reservoir from the master cylinder and remove the seals from the master cylinder.
By Bob
GM Specialist
01/11/2022See more FAQs (4)