< Back ×
2007 Chevrolet Aveo Air Bag Sensor
My Vehicle Change Vehicle
2007 Chevrolet Aveo
< Back to View All
Air Bag
- Department
- Prices
$139.21 MSRP:$210.03You Save: $70.82 (34%)Product Specifications- Notes: Sedan,
- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.2 x 1.8 x 1.9 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Aveo Side Sensor
Vehicle Fitment- 2007 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
Product Specifications- Notes: Sedan,
- Location: Driver Side; Passenger Side
- Other Names: Front Impact Sensor
- Item Dimensions: 3.3 x 1.9 x 1.8 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Aveo Front Impact Sensor
Vehicle Fitment- 2007 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
Product Specifications- Notes: Aveo, Aveo5; Notchback
- Other Names: Front Sensor, Impact Sensor
- Item Dimensions: 3.3 x 1.9 x 1.9 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Aveo Sensor Asm, Inflator Restraint Front End
Vehicle Fitment- 2007 Chevrolet Aveo | LS, LT, Special Value | 4 Cyl 1.6 L GAS
Product Specifications- Notes: Aveo, Aveo5; Notchback
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.3 x 1.9 x 1.9 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Aveo Sensor, Inflator Restraint Side Imp
Vehicle Fitment- 2007 Chevrolet Aveo | LS, LT, Special Value | 4 Cyl 1.6 L GAS
FAQ for Air Bag Sensor Repair
Q: What is the removal procedure for the Inflatable Restraint Instrument Panel Module Disable Switch?
A:
Disconnect the negative battery cable, remove the glove box, disconnect the passenger airbag disable switch connector, and remove the passenger airbag disable switch by pushing the tab on the upper side of the switch housing.
By Bob
GM Specialist
01/11/2022Q: How do you install the Inflatable Restraint Side Impact Sensor?
A:
You need to install the side airbag sensor, and the side airbag sensor mounting bolt, connect the side airbag sensor connector, install the lower trim to the center pillar, and connect the negative battery cable.
By Bob
GM Specialist
01/11/2022Q: How do you install the Inflatable Restraint Front End Sensor?
A:
You need to install the front airbag sensor, and the front airbag sensor mounting bolt, connect the connector to the front airbag sensor, and connect the negative battery cable.
By Bob
GM Specialist
01/11/2022Q: What should be done when the SIR system is affected by the repairs to another component?
A:
The negative battery cable should be removed in this situation.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the SDM mounting bolts?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
28/10/2022Q: What is the removal procedure for the Inflatable Restraint Sensing and Diagnostic Module?
A:
Disable the supplemental inflatable restraints (SIR), remove the floor console, and the connector position assurance lock, disconnect the SDM electrical connector and remove the SDM mounting bolts, and the SDM.
By Bob
GM Specialist
28/10/2022See more FAQs (1)