< Back ×
2007 Chevrolet Aveo Steering Knuckle
My Vehicle Change Vehicle
2007 Chevrolet Aveo
< Back to View All
Control Arms & Suspension Rods
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Aveo Steering Knuckle Assembly
PartNumber: 96870494$103.11 MSRP:$179.47You Save: $76.36 (43%)Product Specifications- Notes: Sedan, W/O ABS; Aveo, Aveo5; Right; W/O ABS
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 9.9 x 9.7 x 8.2 inches
- Item Weight: 7.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 96459243
- Part Description: 2007 Chevrolet Aveo Steering Knuckle Assembly
Vehicle Fitment- 2007 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
OEM (Genuine) 2007 Chevrolet Aveo Knuckle
PartNumber: 96870491$112.52 MSRP:$179.47You Save: $66.95 (38%)Product Specifications- Notes: Sedan, W/ABS; Aveo, Aveo5; Left; W/ABS
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 9.9 x 9.7 x 8.0 inches
- Item Weight: 7.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 96535190
- Part Description: 2007 Chevrolet Aveo Knuckle
Vehicle Fitment- 2007 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
Product Specifications- Notes: Sedan, W/O ABS; Aveo, Aveo5; Left; W/O ABS
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 9.9 x 9.8 x 8.2 inches
- Item Weight: 8.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 96459242
- Part Description: 2007 Chevrolet Aveo Steering Knuckle Assembly
Vehicle Fitment- 2007 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
Product Specifications- Notes: Sedan, W/ABS; Aveo, Aveo5; Right; W/ABS
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 10.7 x 8.5 x 7.0 inches
- Item Weight: 7.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 96535191
- Part Description: 2007 Chevrolet Aveo Steering Knuckle Assembly
Vehicle Fitment- 2007 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
FAQ for Steering Knuckle Repair
Q: What kind of special tools will be used in the removal of the Wheel Hub, Bearing, Knuckle, and Seal?
A:
500-20 Hex Nut, J 36661-2 Forcing Screw, J 37105-1 Support Bridge, J 37105-2 Bearing Adapter, J 37105-3 Hub Adapter.
By Bob
GM Specialist
02/11/2022Q: What kind of special tools will be used in the removal of the Steering Knuckle?
A:
KM-507-C Ball Joint Remover.
By Bob
GM Specialist
02/11/2022Q: What should be noticed when removing the brake caliper and the pads?
A:
DO NOT disconnect the hydraulic brake flexible hose from the caliper.
By Bob
GM Specialist
02/11/2022Q: How do you install the Wheel Hub, Bearing, Knuckle, and Seal?
A:
You need to install the outer snap ring and push the wheel bearing into place with the J 37105-1, the J 37105-2, the 500-20, and the J 36661-2, install the disc brake splash, the inner snap ring and push the wheel hub into place with the J 37105-3, the J 37105-2, the 500-20, and the J 36661-2, and the drive axle into the front wheel hub.
By Bob
GM Specialist
02/11/2022