< Back ×
2007 Chevrolet Colorado Air Temperature Sensor
My Vehicle Change Vehicle
2007 Chevrolet Colorado
< Back to View All
A/C & Heating
- Department
- Prices
$5.51 MSRP:$10.38You Save: $4.87 (47%)Product Specifications- Notes: Canyon, Colorado
- Item Dimensions: 2.1 x 1.8 x 1.0 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10396844
- Part Description: 2007 Chevrolet Colorado AC Temperature Sensor
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$80.92 MSRP:$152.70You Save: $71.78 (48%)Product Specifications- Notes: 2.8 & 2.9 Liter, 2004-07; Canyon, Colorado
- Item Dimensions: 4.4 x 4.1 x 1.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12576410
- Part Description: 2007 Chevrolet Colorado Sensor
Vehicle Fitment- 2007 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Air Temperature Sensor Repair
Q: How to remove the Ambient Air Temperature Sensor?
A:
You need to remove the air inlet grille, disconnect the electrical connector to the ambient air temperature sensor, then release the tabs retaining the sensor to the radiator support bracket, and remove the sensor from the radiator support bracket.
By Bob
GM Specialist
01/11/2022Q: How to install the Mass Airflow Sensor/Intake Air Temperature Sensor?
A:
You should insert the MAF/IAT sensor into the air cleaner assembly, install the 2 screws securing the MAF/IAT sensor to the air cleaner assembly and connect the electrical connector to the MAF/IAT sensor.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Ambient Air Temperature Sensor?
A:
You should position the sensor to the radiator support bracket, install the sensor, connect the electrical connector to the ambient air temperature sensor, and install the air inlet grille.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the MAF/IAT sensor screws?
A:
The recommended torque is 2.25 N.m (20 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Mass Airflow Sensor/Intake Air Temperature Sensor?
A:
You need to disconnect the electrical connector from the mass airflow (MAF)/intake air temperature (IAT) sensor, remove the 2 screws securing the MAF/IAT sensor to the air cleaner assembly, then remove the MAF/IAT sensor from the air cleaner assembly.
By Bob
GM Specialist
01/11/2022