< Back ×
2007 Chevrolet Colorado Crankshaft Seal
My Vehicle Change Vehicle
2007 Chevrolet Colorado
< Back to View All
Crankshafts, Pistons, Rings & Connecting Rods
- Department
- Prices
$16.71 MSRP:$27.62You Save: $10.91 (40%)Product Specifications- Notes: 2.8 & 2.9 Liter; 3.5 & 3.7 Liter; Canyon, Colorado
- Item Dimensions: 6.1 x 6.2 x 0.5 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Colorado Front Cover Seal
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
$21.96 MSRP:$36.37You Save: $14.41 (40%)Product Specifications- Notes: Canyon, Colorado
- Other Names: Rear Main Seal
- Item Dimensions: 4.2 x 4.1 x 1.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12568124
- Part Description: 2007 Chevrolet Colorado Rear Main Seal
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
- Product Specifications
- Notes: Canyon, Colorado
- Other Names: Rear Main Seal Retainer
- Item Dimensions: 19.9 x 14.4 x 3.4 inches
- Item Weight: 3.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12580519
- Part Description: 2007 Chevrolet Colorado Rear Main Seal Retainer
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
FAQ for Crankshaft Seal Repair
Q: What is the recommended torque for the crankshaft rear oil seal housing bolts?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
29/10/2022Q: What kind of special tools will be required in the replacement of the Crankshaft Front Oil Seal?
A:
The tools required include J 45951 Front Seal Installer.
By Bob
GM Specialist
29/10/2022Q: How to install the Crankshaft Front Oil Seal?
A:
You should apply the engine oil to the outside diameter of the crankshaft front oil seal, install the new crankshaft front oil seal, and finally install the crankshaft balancer.
By Bob
GM Specialist
29/10/2022Q: What kind of special tools will be required in the replacement of the Crankshaft Rear Oil Seal and Housing?
A:
The tools required include J 8092 Driver Handle and J 44215 Rear Seal Installer.
By Bob
GM Specialist
29/10/2022Q: How to install the crankshaft rear oil seal housing properly?
A:
You should align the housing with the right alignment dowel, tilting the left side up slightly, next align the housing with the left alignment dowel, then press the housing against the engine block into place.
By Bob
GM Specialist
29/10/2022Q: How to remove the Crankshaft Front Oil Seal?
A:
You need to remove the crankshaft balancer, then pry out the crankshaft front oil seal using a suitable tool and discard the seal.
By Bob
GM Specialist
29/10/2022See more FAQs (1)