< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Colorado
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 2007 Chevrolet Colorado Universal Joints
PartNumber: 89040245
Product Specifications- Notes: Canyon, Colorado; 1 Piece Drive Shaft; Rear;Canyon, Colorado; 2 Piece Drive Shaft; Rear
- Other Names: Universal Joints
- Item Dimensions: 4.1 x 4.2 x 1.6 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12476136, 15577432, 12543576, 12472402
- Part Description: 2007 Chevrolet Colorado Universal Joints
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$98.05 MSRP:$162.29You Save: $64.24 (40%)
Dorman® OE Solutions Front Propeller Shaft Cv Joint Kit for 2007 Chevrolet Colorado
PartNumber: 932-105Product Specifications- Notes: Propeller Shaft
- Additional Contents: Boot Clamp, Internal Snap Ring
- Bolt Diameter: 0.41"
- Bolt Hole Quantity: 4
- Color/Finish: Natural
- Grease Included: Yes
- Installation Hardware Included: No
- Item Grade: Standard Replacement
- Material: Steel
- Spline Count: 0
- Spline Length (In): 3.5"
- UPC: 019495343141
- Part Description: 2007 Chevrolet Colorado OE Solutions Front Propeller Shaft Cv Joint Kit
Vehicle Fitment- 2007 Chevrolet Colorado | All Trims | All Engines
$159.40OEM (Genuine) 2007 Chevrolet Colorado Universal Joints
PartNumber: 89040243
Product Specifications- Notes: Canyon, Colorado; 1 Piece Drive Shaft; Front;Canyon, Colorado; 2 Piece Drive Shaft; Center;Canyon, Colorado; 2 Piece Drive Shaft; Front
- Other Names: Universal Joints
- Item Dimensions: 4.2 x 4.2 x 1.6 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12473124, 12476135, 12543573
- Part Description: 2007 Chevrolet Colorado Universal Joints
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$98.05 MSRP:$162.29You Save: $64.24 (40%)
FAQ for Cv Joint Repair
Q: What is the recommended torque for the large retaining clamp?
A:
The recommended torque is 176 N.m (130 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What kind of special tools will be required when serving the Wheel Drive Shaft Inner Joint and Seal?
A:
The tools required include J 35910 Drive Axle Seal Clamp Plier and J 8059 Snap Ring Pliers.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the small retaining clamp?
A:
The recommended torque is 136 N.m (100 lb-ft).
By Bob
GM Specialist
01/11/2022