< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Colorado
< Back to View All
Driveline, Axles & 4WD
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Colorado Differential Assembly
PartNumber: 25792317
Product Specifications- Notes: 4WD, 3.42 Ratio
- Other Names: Differential Assembly
- Item Dimensions: 27.8 x 18.9 x 12.9 inches
- Item Weight: 83.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Colorado Differential Assembly
Vehicle Fitment- 2007 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
$1405.52 MSRP:$2231.53You Save: $826.01 (38%)
OEM (Genuine) 2007 Chevrolet Colorado Differential
PartNumber: 12479123
Product Specifications- Notes: Canyon, Colorado
- Other Names: Differential Case
- Item Dimensions: 11.7 x 11.2 x 10.4 inches
- Item Weight: 19.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Colorado Differential
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Front Axle Assembly (3.73 Ratio)
PartNumber: 20849983Product Specifications- Notes: Canyon, Colorado; 3.73 Ratio; 4WD, 3.73 Ratio
- Other Names: Axle Assembly, Differential Assembly
- Fitment Type: Direct Replacement
- Replaces: 15876777
- Part Description: 2007 Chevrolet Colorado Front Axle Assembly (3.73 Ratio)
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Front Axle Assembly (4.10 Ratio)
PartNumber: 15876776Product Specifications- Notes: Canyon, Colorado; 4.10 Ratio; 4WD, 4.10 Ratio
- Other Names: Axle Assembly, Differential Assembly
- Fitment Type: Direct Replacement
- Replaces: 15244551
- Part Description: 2007 Chevrolet Colorado Front Axle Assembly (4.10 Ratio)
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Front Differential Case
PartNumber: 12479242
Product Specifications- Notes: Canyon, Colorado
- Other Names: Case, Differential Case
- Item Dimensions: 8.2 x 7.6 x 7.6 inches
- Item Weight: 8.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Colorado Front Differential Case
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Differential Repair
Q: What is the recommended torque for the rear axle fill plug?
A:
The recommended torque is 33 N.m (24 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the drain plug?
A:
The recommended torque is 32 N.m (24 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should the oil level be in the Lubricant Level Inspection-Front Drive Axle?
A:
The oil level should be between 0-8 mm (0-0.4 in) below the fill plug opening.
By Bob
GM Specialist
01/11/2022Q: How to remove the Lubricant-Rear Drive Axle (8.0/8.6 Inch Axle)?
A:
You need to clean the area around the rear axle fill plug, remove the rear axle fill plug and the rear axle cover, then drain the lubricant into a suitable container.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the plug?
A:
The recommended torque is 32 N.m (24 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Lubricant-Rear Drive Axle (8.0/8.6 Inch Axle)?
A:
You should install the rear axle cover, then inspect the fluid level, fill the rear axle with axle lubricant, install the rear axle fill plug, and then lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to replace the Lubricant-Front Drive Axle?
A:
You need to ensure that the vehicle is level, then remove the engine protection shield (EPS) if equipped, remove the drain plug, drain axle fluid into a suitable container, then install the drain plug, remove the fill plug, and fill the drive axle with the proper fluid, then inspect the fluid level, install the fill plug and the EPS if equipped.
By Bob
GM Specialist
01/11/2022See more FAQs (2)