< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Colorado
< Back to View All
Hoods
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Colorado Latch
PartNumber: 15870145
Product Specifications- Other Names: Latch, Lock
- Item Dimensions: 7.8 x 3.7 x 11.1 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 97256656, 15848511
- Part Description: 2007 Chevrolet Colorado Latch
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$97.89 MSRP:$147.70You Save: $49.81 (34%)
FAQ for Hood Latch Repair
Q: How to install the Hood Front Seal?
A:
You should install the front hood seal, and then close the hood.
By Bob
GM Specialist
01/11/2022Q: How to adjust the Hood Latch?
A:
You should loosen the bolts retaining the hood latch to the radiator support and the support bracket, then move the hood latch from side to side until the striker enters the center of the latch assembly.
By Bob
GM Specialist
01/11/2022Q: How to inspect the Hood Latch?
A:
You should release the primary hood latch to inspect the operation of the pop-up spring, then attempt to raise the hood while the hood is in the pop-up position.
By Bob
GM Specialist
01/11/2022Q: How to install the Hood Hinge?
A:
You should position the hinges to the body as previously marked, then install the bolts that retain the hinges to the body, and install the front fender and the hood.
By Bob
GM Specialist
01/11/2022Q: How to remove the Hood Hinge?
A:
You need to remove the hood, and the front fender, mark the location of the hinges to the body, then remove the bolts that retain the hinges, and remove the hinges from the body.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts retaining the latch support?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Hood Front Seal?
A:
You need to open the hood, then remove the front hood seal by pulling downward on the seal, starting from one end.
By Bob
GM Specialist
01/11/2022Q: How to install the Hood Latch?
A:
You should connect the hood latch cable to the latch, next position the latch to the previously marked location on the radiator support, install the bolts which retain the latch to the radiator support, install the hood latch support, and the bolts which retain the latch support, then inspect the latch for proper operation before closing the hood, inspect the alignment of the latch to the hood striker, lastly install the grille.
By Bob
GM Specialist
01/11/2022Q: How to install the Hood Rear Seal?
A:
You should position the seal to the upper cowl panel, insert each retainer into the holes in the body, and close the hood.
By Bob
GM Specialist
01/11/2022Q: How to remove the Hood Rear Seal?
A:
You need to open the hood, grasp the rear hood seal at each retainer and lift upwards to remove, then remove the seal from the upper cowl panel.
By Bob
GM Specialist
01/11/2022See more FAQs (5)