Part Description: 2007 Chevrolet Corvette Blower Motor
More Info
Vehicle Fitment
2007 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Stingray, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
FAQ for Blower Motor Repair
Q: What is the proper way to install the Blower Motor?
A:
You shall install the blower motor to the HVAC module, connect the blower motor electrical connector, and install the RH insulator panel.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Blower Motor?
A:
The procedure is to remove the right-hand (RH) insulator panel, disconnect the blower motor electrical connector, and remove the blower motor.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the installation procedure for the Ambient Air Temperature Sensor?
A:
The procedure is to install the ambient Air Temperature Sensor, secure it to the radiator support, and connect the ambient air temperature sensor electrical connector.
Q: What is the installation procedure for the Heater Core Cover?
A:
The procedure is to install the Heater Core cover, the DTM sensors, and the HVAC module.
Q: What should be noticed while removing the A/C compressor hose assembly?
A:
You shall cap or tape the open A/C components immediately to prevent system contamination.