< Back ×
2007 Chevrolet Corvette Driveshaft
My Vehicle Change Vehicle
2007 Chevrolet Corvette
< Back to View All
Driveline, Axles & 4WD
- Department
- Prices
$436.37 MSRP:$722.24You Save: $285.87 (40%)Product Specifications- Notes: Z06; Corvette; Manual Trans; All
- Location: Driver Side; Passenger Side
- Other Names: Axle Assembly
- Item Dimensions: 33.9 x 6.2 x 6.2 inches
- Item Weight: 23.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15874726, 15891870
- Part Description: 2007 Chevrolet Corvette Axle Assembly
Vehicle Fitment- 2007 Chevrolet Corvette | 427 Limited Edition Z06, Base, Z06 | 8 Cyl 6.0 L GAS, 8 Cyl 7.0 L GAS
$966.72 MSRP:$1534.85You Save: $568.13 (38%)Product Specifications- Notes: Corvette; Manual Trans; 7.0l
- Other Names: Drive Shaft
- Item Dimensions: 60.9 x 5.1 x 5.1 inches
- Item Weight: 18.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Corvette Drive Shaft
Vehicle Fitment- 2007 Chevrolet Corvette | 427 Limited Edition Z06, Z06 | 8 Cyl 7.0 L GAS
- $945.91 MSRP:
$1222.90You Save: $276.99 (23%)Product Specifications- Notes: Corvette; Auto Trans
- Other Names: Drive Shaft
- Item Dimensions: 59.0 x 5.1 x 5.1 inches
- Item Weight: 19.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Corvette Propeller Shaft Assembly
Vehicle Fitment- 2007 Chevrolet Corvette | 427 Limited Edition Z06, Base, Z06, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
Product Specifications- Notes: Base
- Location: Driver Side; Passenger Side
- Other Names: Axle Assembly
- Item Dimensions: 33.0 x 8.5 x 7.1 inches
- Item Weight: 22.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10350598, 25941373, 22762284, 15851726
- Part Description: 2007 Chevrolet Corvette Axle Assembly
Vehicle Fitment- 2007 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
- Product Specifications
- Notes: Corvette; Manual Trans; 6.0l
- Other Names: Drive Shaft
- Item Dimensions: 64.9 x 8.3 x 7.9 inches
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Corvette Propeller Shaft Assembly
Vehicle Fitment- 2007 Chevrolet Corvette | Base | 8 Cyl 6.0 L GAS
FAQ for Driveshaft Repair
Q: What is the removal procedure for the Driveline Tunnel Closeout Panel?
A:
The procedure is to remove the catalytic converters and the closeout panel.
By Bob
GM Specialist
29/10/2022Q: What should be noticed while overhauling the Driveline Support?
A:
To prevent binding, the propeller shaft assembly must be withdrawn straight and evenly from the driveline tube.
By Bob
GM Specialist
29/10/2022Q: What kind of tools will be required in the replacement of the Driveline Support Assembly?
A:
The tools required include J 42055 Transmission Support Fixture.
By Bob
GM Specialist
29/10/2022Q: What should be noticed before removing the Driveline Support Assembly?
A:
When tilting down the rear of the driveline, observe the clearance between the rear of the engine and the composite dash panel. Do not allow the engine to rest unsupported against the composite dash panel, or vehicle damage may result.
By Bob
GM Specialist
29/10/2022Q: What should be noticed before servicing the Rear Bearing Housing Assembly?
A:
Do not separate the input shaft, propeller shaft, couplings, or bearing housing assembly, unless required. If the input shaft, couplings, propeller shaft, or bearing housing assembly must be separated, the components must be marked before disassembly. During assembly, the components must be returned to their original position and location.
By Bob
GM Specialist
29/10/2022Q: What should be noted when removing Cleaning and Inspecting the Driveline Support Assembly?
A:
You should wear safety glasses to avoid eye damage.
By Bob
GM Specialist
29/10/2022Q: What kind of tools will be required while overhauling the Driveline Support?
A:
The tools required include J 2619-01 Slide Hammer and J 24420-C Harmonic Balancer Puller.
By Bob
GM Specialist
29/10/2022Q: What is the proper way to install the Driveline Tunnel Closeout Panel?
A:
The proper way is to install the driveline tunnel closeout panel and the catalytic converters.
By Bob
GM Specialist
29/10/2022Q: What kind of tools will be required while Cleaning and Inspecting the Driveline Support Assembly?
A:
The tools required include J 7872 Magnetic Base Dial Indicator Set.
By Bob
GM Specialist
29/10/2022See more FAQs (4)