< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Corvette
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Corvette Pad, Driver Seat Cushion
PartNumber: 19330709
Product Specifications- Notes: W/O Heat, 2005-11; W/Heat; W/O Heat, 2005-10
- Other Names: Seat Cushion Pad
- Item Dimensions: 27.8 x 22.8 x 8.8 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88898540
- Part Description: 2007 Chevrolet Corvette Pad, Driver Seat Cushion
Vehicle Fitment- 2007 Chevrolet Corvette | 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
FAQ for Seat Cushion Pad Repair
Q: What is the removal procedure for the Seat Cushion Frame?
A:
The procedure is to remove the seat, the pre-tensioner and seat belt buckle, the side trim panel, the seat cushion cover and pad, the inflatable restraint passenger presence system, the lumbar pump and module, the seat back, the seat cushion frame and the wire assembly.
By Bob
GM Specialist
01/11/2022Q: How many fasteners does the Seat Back Trim to Frame attach?
A:
It attaches 8 fasteners.
By Bob
GM Specialist
01/11/2022Q: How many retainers does the Seat Back Trim to Frame attach?
A:
It attaches 8 retainers.
By Bob
GM Specialist
01/11/2022Q: What should be noticed while servicing the Seat Cushion Cover Assembly?
A:
You shall remove the hog rings attaching the cover to the frame, and untie the drawstring releasing the cover from the cover.
By Bob
GM Specialist
01/11/2022Q: How many screws does the Shield Attachment attach?
A:
It attaches 1 screw.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Seat Cushion Frame?
A:
The proper way is to install the springs and wires, the recliner mechanism, the seat adjuster, the seat back, the actuator, the trim cover and pad, the side trim panel, the inflatable restraint passenger presence system, the seat cushion cover and pad, the pretensioner and seat belt buckle and the seat.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Shield Attachment Screw?
A:
It is 3 N.m (27 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Front Seat Back Recliner Mechanism?
A:
The procedure is to remove the seat, the seat cushion cover, the cables from the actuators, and the recliner mechanism.
By Bob
GM Specialist
01/11/2022Q: What should be noticed while servicing the Seat Cushion Pad Assembly?
A:
You shall disconnect the electrical connector and peel away from the seat cushion pad assembly if equipped.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Front Seat Back Recliner Mechanism?
A:
The proper way is to install the recliner mechanism, the cables to the actuators, the seat adjusters, the seat cushion trim cover, the side trim panel, and the seat.
By Bob
GM Specialist
01/11/2022See more FAQs (8)