< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Corvette
< Back to View All
Steering Systems
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Corvette Sensor, Steering Wheel Position
PartNumber: 15231652
Product Specifications- Notes: Corvette; W/O Telescopic Wheel.; W/O Telescoping
- Other Names: Position Sensor, Sensor
- Item Dimensions: 3.8 x 3.2 x 1.8 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88965330, 26059045
- Part Description: 2007 Chevrolet Corvette Sensor, Steering Wheel Position
Vehicle Fitment- 2007 Chevrolet Corvette | 427 Limited Edition Z06, Base, Z06, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$95.46 MSRP:$166.15You Save: $70.69 (43%)
OEM (Genuine) 2007 Chevrolet Corvette Sensor
PartNumber: 15231656
Product Specifications- Notes: Corvette; W/Telescopic Wheel.; W/Telescoping
- Other Names: Position Sensor, Sensor
- Item Dimensions: 5.3 x 4.2 x 4.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26069756, 88965535
- Part Description: 2007 Chevrolet Corvette Sensor
Vehicle Fitment- 2007 Chevrolet Corvette | 427 Limited Edition Z06, Base, Z06, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$117.39 MSRP:$186.40You Save: $69.01 (38%)
FAQ for Steering Angle Sensor Repair
Q: What should be noticed before installing the Steering Wheel Position Sensor?
A:
If reusing the existing sensor, no centering of the sensor is required.
By Bob
GM Specialist
01/11/2022Q: What should be noticed while servicing the Steering Wheel Position Sensor?
A:
You shall rotate the steering shaft assembly to the 12 o'clock position.
By Bob
GM Specialist
01/11/2022Q: What should be noticed if reusing the Steering Wheel Position Sensor?
A:
You have to center the steering wheel position sensor before removal.
By Bob
GM Specialist
01/11/2022Q: What should be noticed before removing the Steering Wheel Position Sensor?
A:
You shall identify the type of steering wheel position sensor from the illustrations shown before removing the sensor from the steering column. Once you have identified the steering wheel position sensor, you shall follow the instructions listed in the removal procedure.
By Bob
GM Specialist
01/11/2022Q: What ways should be resorted to correct the problem of a Stabilitrak(R) or Active Handling System light being illuminated?
A:
The way is to remove the driver's side closeout (insulator) panel, install the clip, P/N 19179794, into the connector, reinstall the closeout panel, clear the DTC with a scan tool, and road test the vehicle.
By Bob
GM Specialist
01/11/2022