< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Equinox
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Brands
- Prices
Cardone Reman® Master Cylinder Bleeding Tool for 2007 Chevrolet Equinox
PartNumber: 10-5000MCBProduct Specifications- Bleeder Adapters Included: No
- Bleeder Pressure Gauge Included: No
- Bleeder Tubing Included: No
- E-Waste: No
- Material: Plastic
- Package Contents: Bleeder Tool
- Product Condition: New
- UPC: 082617849678
- Part Description: 2007 Chevrolet Equinox Master Cylinder Bleeding Tool
Vehicle Fitment- 2007 Chevrolet Equinox | All Trims | All Engines
FAQ for Brake Master Cylinder Bleeder Tool Repair
Q: What should be noticed when performing the Auto Bleed Procedure?
A:
The Auto Bleed Procedure may be terminated at any time during the process by pressing the EXIT button. No further Scan Tool prompts about the Auto Bleed procedure will be given. After exiting the bleed procedure, you should relieve bleed pressure and disconnect bleed equipment per the manufacturer's instructions.
By Bob
GM Specialist
28/10/2022Q: What should be done if the brake pedal feels spongy?
A:
You will need to inspect the brake system for external leaks first. If equipped with antilock brakes, using a scan tool, you can perform the antilock brake system automated bleeding procedure to remove any air that may have been trapped in the brake pressure modulator valve (BPMV).
By Bob
GM Specialist
28/10/2022Q: What should be noticed when adding fluid to the brake master cylinder reservoir?
A:
You will need to use only GM-approved or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container. The use of any type of fluid other than the recommended type of brake fluid may cause contamination which could result in damage to the internal rubber seals and/or rubber linings of hydraulic brake system components.
By Bob
GM Specialist
28/10/2022Q: What should be done if the bleeding procedure is aborted?
A:
You will need to perform the following steps before resuming the bleed procedure: if the brake pedal feels spongy, perform the conventional brake bleed procedure again.
By Bob
GM Specialist
28/10/2022Q: What tools are needed for the Hydraulic Brake System Bleeding (Pressure)?
A:
You will need J 29532 Diaphragm Type Brake Pressure Bleeder, or equivalent, and J 44894-A Brake Pressure Bleeder Adapter.
By Bob
GM Specialist
28/10/2022