< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Equinox
< Back to View All
Exhaust Manifolds, Pipes & Mufflers
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Equinox Shield-Exhaust Manifold Heat
PartNumber: 12575494
Product Specifications- Notes: 3.4 Liter, Right Side, Upper
- Location: Passenger Side
- Other Names: Heat Shield
- Item Dimensions: 17.4 x 5.7 x 5.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Equinox Shield-Exhaust Manifold Heat
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
OEM (Genuine) 2007 Chevrolet Equinox Shield-Exhaust Manifold Heat
PartNumber: 12575493
Product Specifications- Notes: 3.4 Liter, Left Side
- Location: Driver Side
- Other Names: Heat Shield
- Item Dimensions: 22.4 x 5.9 x 5.9 inches
- Item Weight: 2.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Equinox Shield-Exhaust Manifold Heat
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
OEM (Genuine) 2007 Chevrolet Equinox Shield-Exhaust Manifold Lower Heat
PartNumber: 12575495
Product Specifications- Notes: 3.4 Liter, Right Side, Lower
- Location: Passenger Side
- Other Names: Heat Shield
- Item Dimensions: 22.0 x 6.0 x 5.9 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Equinox Shield-Exhaust Manifold Lower Heat
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
OEM (Genuine) 2007 Chevrolet Equinox Shield Asm-Exhaust Heat (At Dash Panel)
PartNumber: 25912945
Product Specifications- Notes: 3.4 Liter
- Other Names: Exhaust Heat Shield, Heat Shield
- Item Dimensions: 42.1 x 9.8 x 6.1 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22722801
- Part Description: 2007 Chevrolet Equinox Shield Asm-Exhaust Heat (At Dash Panel)
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
FAQ for Exhaust Heat Shield Repair
Q: How to remove the Exhaust Manifold Heat Shield-Left Side?
A:
You will need to remove the heat shield bolts, then remove the heat shield from the exhaust manifold.
By Bob
GM Specialist
01/11/2022Q: How to install the Exhaust Manifold Heat Shield-Left Side?
A:
You may need to install the heat shield to the exhaust manifold, install the heat shield bolts to the exhaust manifold, and tighten the bolts to 10 n.m (89 lb).
By Bob
GM Specialist
01/11/2022Q: How to install the Exhaust Manifold Heat Shield-Right Side?
A:
You may need to install the upper and lower heat shields to the exhaust manifold, then install the heat shield bolts to the exhaust manifold and tighten the bolts to 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Exhaust Manifold Heat Shield-Right Side?
A:
You will need to remove the heat shield bolts, then remove the lower and upper heat shields from the exhaust manifold.
By Bob
GM Specialist
01/11/2022Q: How to remove the Exhaust Heat Shield-Center?
A:
You will need to raise the vehicle and remove the exhaust system. If the vehicle is equipped with all-wheel drive (AWD), you should remove the propeller shaft underbody guard loop bolts and guard loop. Then you can remove the fuel tank strap bolt, the rivets, and the shield.
By Bob
GM Specialist
29/10/2022Q: How to install the Exhaust Heat Shield-Center?
A:
You may need to position the shield to the vehicle, then install the rivets and the fuel tank strap bolt. If the vehicle is equipped with AWD, you can install the propeller shaft underbody guard loop and bolts, and tighten the bolts to 25 N.m (18 lb-ft), then install the exhaust system.
By Bob
GM Specialist
29/10/2022Q: How to install the Front Exhaust Heat Shield?
A:
You may need to position the shield to the vehicle, align the front hole stud, and install the nut, the rivets, and the catalytic converter.
By Bob
GM Specialist
29/10/2022Q: What's the recommended torque for the heat shield-to-underbody nut?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
29/10/2022Q: What's the recommended torque for the fuel tank strap bolt?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
29/10/2022Q: How to remove the Front Exhaust Heat Shield?
A:
You will need to raise the vehicle, remove the catalytic converter, the nut, the rivets, and then the heat shield.
By Bob
GM Specialist
29/10/2022See more FAQs (5)