< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Equinox
< Back to View All
Rocker Panels & Floors
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Equinox Panel-Rear Compartment
PartNumber: 20778471
Product Specifications- Other Names: Floor Pan, Floor Pan Assembly
- Item Dimensions: 59.6 x 49.4 x 10.2 inches
- Item Weight: 23.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15222319, 15859570
- Part Description: 2007 Chevrolet Equinox Panel-Rear Compartment
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2007 Chevrolet Equinox Floor Pan
PartNumber: 5481614
Product Specifications- Part Description: 2007 Chevrolet Equinox Floor Pan
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
FAQ for Floor Pan Repair
Q: What should be noticed when replacing the rear side door opening floor carpet retainer?
A:
You will need to pull up at the front of the carpet retainer to disengage the retainer clips then rotate the rear of the retainer away from the bodyside trim panel.
By Bob
GM Specialist
29/10/2022Q: What's the preliminary procedure for replacing the Floor Panel Carpet?
A:
The procedure is to remove the front seats, the rear seats, the front carpet retainer, the center console trim panels, and the center console.
By Bob
GM Specialist
29/10/2022Q: What kind of materials are allowed to use in the product?
A:
You may safely use GM Vehicle Care Odor Eliminator on fabrics, vinyl, leather, carpet, and sound-deadening materials. You may also induce this product into HVAC modules and instrument panel ducts for the control of non-bacterial-related odors.
By Bob
GM Specialist
29/10/2022Q: What are the tips for replacing the Front Side Door Opening Floor Carpet Retainer?
A:
You may pull inward at the front of the carpet retainer to disengage the retainer clips from the kick panel area, then pull up to disengage the remaining retainers.
By Bob
GM Specialist
29/10/2022Q: What are the criteria for drying or for replacing the components if the carpet or the pad or the insulator is wet?
A:
For a 1-piece carpet assembly bonded to a cotton or fiber padding, you can replace the entire assembly. For a 2-piece carpet assembly with cotton or fiber padding, you can replace the padding only. While the carpet is out of the vehicle, you need dry the carpet using the method described below. For a 1-piece carpet assembly bonded to foam padding or attached to synthetic padding, you can dry the carpet using the method described below. For a 2-piece carpet assembly with synthetic padding, you can dry the assembly using the method described below.
By Bob
GM Specialist
29/10/2022Q: How many retainer clips are needed?
A:
5retainer clips attach.
By Bob
GM Specialist
29/10/2022Q: What should be noticed when removing the front floor panel carpet assembly?
A:
You will need to remove the floor carpet by pulling the carpet from under the center pillar assemblies and lifting the carpet out of the vehicle.
By Bob
GM Specialist
29/10/2022Q: What's the function of the GM Vehicle Care Odor Eliminator, GM P/N 12378554 (Canadian and Saturn P/N 88901678)?
A:
GM Vehicle Care Odor Eliminator, GM P/N 12378554 (Canadian and Saturn P/N 88901678), may control or eliminate odors in the interior and luggage compartment areas of GM vehicles. This non-toxic, biodegradable, odorless product has been shown to greatly reduce or remove the following types of odor: objectionable smells of mold and mildew resulting from vehicle water leaks, and customer-created odors, such as smoke.
By Bob
GM Specialist
29/10/2022Q: What's the recommended drying method?
A:
If you observe puddles of liquid on the carpet face, use a wet vacuum to remove the excess moisture. You can blot the face of the carpet with a towel to absorb as much moisture as possible. You can also point a fan at the affected area and air-dry the carpet.
By Bob
GM Specialist
29/10/2022See more FAQs (4)