< Back ×
2007 Chevrolet Equinox Hood Latch
My Vehicle Change Vehicle
2007 Chevrolet Equinox
< Back to View All
Hoods
- Department
- Prices
Product Specifications- Notes: W/Keyless Entry
- Other Names: Lock, Lock Plate
- Item Dimensions: 9.9 x 5.2 x 5.1 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Equinox Lock Plate
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
OEM (Genuine) 2007 Chevrolet Equinox Plate Asm-Hood Secondary Striker & Primary Latch
PartNumber: 15799992Product Specifications- Notes: W/O Keyless Entry
- Other Names: Lock, Lock Plate
- Item Dimensions: 9.4 x 4.0 x 3.3 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22692285
- Part Description: 2007 Chevrolet Equinox Plate Asm-Hood Secondary Striker & Primary Latch
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
Product Specifications- Other Names: Lock, Safety Catch
- Item Dimensions: 5.6 x 4.5 x 2.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5481479, 05481479
- Part Description: 2007 Chevrolet Equinox Latch Asm-Hood Secondary
Vehicle Fitment- 2007 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
FAQ for Hood Latch Repair
Q: What's the recommended torque for the hood primary and secondary latch bolts?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: How many secondary hood latch bolts are needed when installing the Hood Secondary Latch (Equinox)?
A:
2secondary hood latch bolts.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when you remove a hood holding an open device?
A:
You will need to provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the hood hinge upper and lower bolts?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What's the tip for replacing the hood's primary and secondary latch assembly?
A:
You may mark the hood latch location to the support bracket with a grease pencil, and disconnect the hood latch release cable.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when replacing the secondary hood latch assembly?
A:
You will need to mark the hood latch location to the hood with a grease pencil.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the secondary hood latch bolts?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What's the tip for replacing the hood rear weatherstrip assembly?
A:
You may pull the hood rear seal from the cowl panel flange, and verify hood seal fits flush against the hood rear side seals.
By Bob
GM Specialist
01/11/2022See more FAQs (3)