< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Impala
< Back to View All
Ignition, Distributors & ECM
- Department
- Brands
- Prices
OEM (Genuine) 2007 Chevrolet Impala PCM
PartNumber: 12678511
Product Specifications- Notes: 3.5 & 3.9 Liter; 5.3 Liter
- Other Names: ECM, PCM
- Item Dimensions: 8.2 x 7.3 x 4.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12607096, 12636660
- Part Description: 2007 Chevrolet Impala PCM
Vehicle Fitment- 2007 Chevrolet Impala | LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$278.36 MSRP:$524.24You Save: $245.88 (47%)
Cardone Reman® Remanufactured Engine Control Computer for 2007 Chevrolet Impala
PartNumber: 77-7121FProduct Specifications- Notes: First Source - Call For Availability;with OE # 12597121;Vehicle specific Flash programming Reqd ON or OFF the vehicle.Accurate VIN & mileage are req'd
- UPC: 082617765916
- Part Description: 2007 Chevrolet Impala Remanufactured Engine Control Computer
Vehicle Fitment- 2007 Chevrolet Impala | All Trims | 6 Cyl 3.5L
- 2007 Chevrolet Impala | All Trims | 6 Cyl 3.9L
OEM (Genuine) 2007 Chevrolet Impala Engine Control Module (W/ 2Nd Mpu W/O Boot)& Calibration
PartNumber: 12596679
Product Specifications- Notes: Impala, Monte Carlo
- Other Names: ECM, PCM
- Item Dimensions: 7.8 x 5.5 x 5.4 inches
- Item Weight: 2.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Impala Engine Control Module (W/ 2Nd Mpu W/O Boot)& Calibration
Vehicle Fitment- 2007 Chevrolet Impala | LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
FAQ for Engine Control Module Repair
Q: How do you install the engine control module?
A:
First install the ECM to the air cleaner lower housing, connect the ECM electrical connectors and install the air cleaner assembly. Next install the left front inner fender brace, connect the negative battery cable and program the new ECM.
By Omar
GM Specialist
08/04/2022Q: What are dealers required to use when they are performing a repair under the New Vehicle Limited Warranty?
A:
They are required to use only genuine GM or GM-approved parts and accessories.
By Omar
GM Specialist
05/04/2022Q: What is the purpose of avoiding touching the connector pins or soldered components on the circuit board?
A:
The purpose is to prevent possible electrostatic discharge damage to the PCM.
By Omar
GM Specialist
04/04/2022Q: What is the removal procedure for the engine control module?
A:
First, retrieve the percentage of remaining engine oil, disconnect the negative battery cable and remove the left front inner fender brace. Next, remove the air cleaner assembly, disconnect the ECM electrical connectors and remove the ECM.
By Bob
GM Specialist
01/04/2022Q: When will the fuel system need to contain ASTM gasoline with 10% or less ethanol content?
A:
The fuel system will need to contain ASTM gasoline with 10% or less ethanol content when an E85 compatible vehicle is built, an ECM or PCM is replaced, or when the learned alcohol content has been reset with a scan tool.
By Bob
GM Specialist
28/03/2022