Part Description: 2007 Chevrolet Impala Trunk Lamp
More Info
Vehicle Fitment
2007 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Notes: Without Sunroof; Part included with dome lamp assembly.; With Sunroof; Part included with dome lamp.
Other Names: Dome Lamp, Housing, Lamp Housing
Item Dimensions: 8.1 x 4.7 x 2.8 inches
Item Weight: 0.50 Pounds
Fitment Type: Direct Replacement
Part Description: 2007 Chevrolet Impala Housing, Dome & Reading Lamp
More Info
Vehicle Fitment
2007 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Notes: Without Sunroof, Neutral; With Sunroof, Neutral
Other Names: Dome Lamp Assembly
Item Dimensions: 8.3 x 3.6 x 1.5 inches
Item Weight: 0.40 Pounds
Fitment Type: Direct Replacement
Replaces: 89026903
Part Description: 2007 Chevrolet Impala Lamp Asm-Dome & Reading *Neutral L
More Info
Vehicle Fitment
2007 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Notes: Without Sunroof, Ebony, Titanium; With Sunroof, Ebony, Titanium
Other Names: Dome Lamp Assembly
Item Dimensions: 8.8 x 5.1 x 3.1 inches
Item Weight: 0.50 Pounds
Fitment Type: Direct Replacement
Replaces: 89026620
Part Description: 2007 Chevrolet Impala Dome Lamp Assembly
More Info
Vehicle Fitment
2007 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
FAQ for Interior Lights Repair
Q: How do you install the vanity mirror lamp bulb?
A:
You can install the bulb, align the upper lens tab to the opening, insert a small flat-bladed tool at the outer edge of the lamp lens and close the illuminated mirror door and raise the sunshade.
By Bob
GM Specialist
06/04/2022
Q: What is the removal procedure for the vanity mirror lamp bulb?
A:
The procedure is to lower the sunshade and open the illuminated mirror door, insert a small flat-bladed tool at the outer edge of the lamp lens in the slot and remove the bulb.
By Bob
GM Specialist
31/03/2022
Q: What should be used to test for voltage in high-impedance circuits?
A:
ADMM should be used instead of a test lamp.
By Bob
GM Specialist
30/03/2022
FAQ for Other Repair Info
Q: How many screws does the rear license plate lamp have?
A:
The rear license plate lamp has a total of 2 screws.