< Back ×
2007 Chevrolet Malibu Coolant Hose
My Vehicle Change Vehicle
2007 Chevrolet Malibu
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Prices
$58.47 MSRP:$76.37You Save: $17.90 (24%)Product Specifications- Notes: Malibu, Malibu Maxx; 3.5l;Malibu, Malibu Maxx; 3.9l; 3.5 Liter, 2007-08; 3.9 Liter
- Other Names: Lower Hose
- Item Dimensions: 6.4 x 4.5 x 12.2 inches
- Item Weight: 3.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Malibu Lower Hose
Vehicle Fitment- 2007 Chevrolet Malibu | Classic LS, Classic LT, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
$64.30 MSRP:$84.01You Save: $19.71 (24%)Product Specifications- Notes: Malibu, Malibu Maxx; 3.5l;Malibu, Malibu Maxx; 3.9l; 3.5 Liter, 2007-08; 3.9 Liter
- Other Names: Upper Hose
- Item Dimensions: 4.4 x 3.2 x 29.9 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Malibu Upper Hose
Vehicle Fitment- 2007 Chevrolet Malibu | Classic LS, Classic LT, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
$7.63 MSRP:$9.95You Save: $2.32 (24%)Product Specifications- Notes: Malibu, Malibu Maxx; 2.2l; 2.2 Liter, 2006-08
- Other Names: Upper Hose
- Item Dimensions: 19.7 x 5.4 x 5.1 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Malibu Radiator Inlet Hose (Upper)
Vehicle Fitment- 2007 Chevrolet Malibu | Base, Classic LS, LS, LT, LTZ | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
Product Specifications- Notes: Malibu, Malibu Maxx; 2.2l; 2.2 Liter, 2006-08
- Other Names: Lower Hose
- Item Dimensions: 21.8 x 6.4 x 2.4 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22682504
- Part Description: 2007 Chevrolet Malibu Radiator Outlet Hose (Lower)
Vehicle Fitment- 2007 Chevrolet Malibu | Base, LS, LT | 4 Cyl 2.2 L GAS
FAQ for Coolant Hose Repair
Q: How do you install the fluid cooler pipe seal?
A:
You can install the seal for the cooler line, and the transaxle oil cooler line, and add fluid to the transaxle.
By Bob
GM Specialist
24/03/2022Q: What is the oil feed pipes installation procedure?
A:
First replace the seal rings only if they are cut, swelled, or damaged. Next, install the oil feed pipe assembly and hand start the oil feed pipe assembly bolts. Tighten the oil feed pipe assembly bolts to 12 Nm. After that, install the new filter neck seal into the transaxle case, the oil level control valve, and the transaxle oil pan/gasket.
By Bob
GM Specialist
21/03/2022Q: What is the proper way to remove the fluid cooler pipe seal?
A:
The proper way is to remove the transaxle oil cooler lines, and the cooler line seals, and throw away the seal.
By Bob
GM Specialist
19/03/2022