Part Description: 2007 Chevrolet Malibu Link Asm-Rear Side Door Check
More Info
Vehicle Fitment
2007 Chevrolet Malibu | Base, Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
FAQ for Door Check Repair
Q: How do I install the Front Side Door Check Link?
A:
Start with placing the check link to the door, then install the nuts and bolts to attach it to the vehicle. Install the water deflector and the inner trim panel.
By Bob
GM Specialist
27/03/2022
Q: How do I remove the Front Side Door Check Link?
A:
Start with removing the door trim panel, the water deflector, the front door check link bolt, the front door check link nuts, and the front door check link from the door.
By Omar
GM Specialist
25/03/2022
Q: What is the rear side door check link installation procedure?
A:
Install the rear door check link nuts and tighten the nuts to 10 Nm. Next, install the front door check link bolt and tighten the bolt to 9 Nm. Finally, install the water deflector and the door inner trim panel.
By Omar
GM Specialist
18/03/2022
FAQ for Other Repair Info
Q: How do I install the power door lock switch?
A:
Start with installing the switch to the bezel, and next connect the electrical connector to the Door Lock Switch. Then install the door handle bezel to the door trim and the door trim panel.
Q: How do I remove the front side door hinge?
A:
Open and support the door, then clean off the hinges and mark the spot they are installed to. Remove the front door, the hinge pillar bolts and nuts, and the front Door Hinge from the vehicle.
Q: How do I install the door handle?
A:
Start with hooking the inside rod release to the front door inside the handle. Then place the door handle to the door's inner panel locations, and install the rivet. Position the water deflector and install the front door trim panel.