< Back ×
2007 Chevrolet Malibu Exterior Door Handle
My Vehicle Change Vehicle
2007 Chevrolet Malibu
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
$30.73 MSRP:$48.34You Save: $17.61 (37%)Product Specifications- Notes: Sedan; Wagon
- Location: Driver Side; Passenger Side
- Other Names: Handle, Outside
- Item Dimensions: 8.4 x 3.1 x 3.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Malibu Handle, Outside
Vehicle Fitment- 2007 Chevrolet Malibu | Base, Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
FAQ for Exterior Door Handle Repair
Q: How do I install the outside door handle?
A:
Start with installing the door handle rod to the housing and the lock. Then attach the handle housing by attaching the bolts and installing the handle and cap gaskets. Place the outside handle into the door and slide forward. Next, you'll need to install the lock cylinder, the head cap, the bolt, the TORX plug, the water deflector, and the trim panel.
By Omar
GM Specialist
26/03/2022Q: How do I remove the door outside handle?
A:
Start with removing the plug to access the bolt, and remove the bolt and the outside cap. Then pull the handle rearward and out of the door. Next, pull the gaskets off the door. Remove the handle housing, trim panel, water deflector, lock cylinder, the handle rod from the lock and housing.
By Omar
GM Specialist
25/03/2022Q: What is the door outside handle installation procedure?
A:
Install the door handle rod to the housing, the handle rod to the lock, and the T25 TORX bolt to the handle housing. Next, tighten the bolt to 3 Nm and install the handle and cap gasket. Install the lock cylinder, and the TORX head cap and tighten the bolt to 3 Nm. Install the TORX plug, the water deflector, and the trim panel.
By Omar
GM Specialist
22/03/2022Q: What is the installation procedure for the door handle rod?
A:
The procedure is to install the clip cover, the water deflector, and the trim panel.
By Omar
GM Specialist
22/03/2022Q: What is the proper way to remove the door handle rod?
A:
The proper way is to remove the rear door trim panel, the water deflector, and the threaded rod.
By Omar
GM Specialist
19/03/2022