< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Malibu
< Back to View All
Control Arms & Suspension Rods
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Malibu Knuckle
PartNumber: 19303853
Product Specifications- Notes: Malibu, Malibu Maxx; Left
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 14.8 x 14.7 x 7.3 inches
- Item Weight: 6.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22705299, 25872803, 21995733
- Part Description: 2007 Chevrolet Malibu Knuckle
Vehicle Fitment- 2007 Chevrolet Malibu | Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L ELECTRIC/GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
$276.18 MSRP:$457.11You Save: $180.93 (40%)
OEM (Genuine) 2007 Chevrolet Malibu Steering Knuckle
PartNumber: 19303854
Product Specifications- Notes: Malibu, Malibu Maxx; Right
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 11.3 x 11.1 x 6.3 inches
- Item Weight: 5.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22705300, 25872804, 21995734, 15225210
- Part Description: 2007 Chevrolet Malibu Steering Knuckle
Vehicle Fitment- 2007 Chevrolet Malibu | Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L ELECTRIC/GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
OEM (Genuine) 2007 Chevrolet Malibu Knuckle, Rear Suspension
PartNumber: 19303839
Product Specifications- Notes: Malibu, Malibu Maxx; Left
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 15.4 x 12.1 x 6.7 inches
- Item Weight: 6.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22669733, 15942149
- Part Description: 2007 Chevrolet Malibu Knuckle, Rear Suspension
Vehicle Fitment- 2007 Chevrolet Malibu | Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L ELECTRIC/GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
OEM (Genuine) 2007 Chevrolet Malibu Knuckle, Rear Suspension
PartNumber: 19303840Product Specifications- Notes: Malibu, Malibu Maxx; Right
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 6.8 x 15.9 x 11.9 inches
- Item Weight: 6.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15942150, 22669734
- Part Description: 2007 Chevrolet Malibu Knuckle, Rear Suspension
Vehicle Fitment- 2007 Chevrolet Malibu | Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L ELECTRIC/GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
FAQ for Steering Knuckle Repair
Q: How do I install the steering knuckle?
A:
Start with installing the steering knuckle to the strut assembly. Guide the axle through the steering knuckle. Next, install the lower control arm and the outer tie rod to the steering knuckle. Then Install the wheel bearing, brake rotor, brake caliper, and front wheels. Lower the vehicle.
By Bob
GM Specialist
25/03/2022Q: How do I remove the steering knuckle?
A:
First lift and support the vehicle, next you will need to remove the wheel bearing, and the outer tie rod to the knuckle nut, and separate the tie rod from the steering knuckle. Remove the lower control arm, the strut to steering knuckle nuts and bolts, and the steering knuckle from the vehicle.
By Bob
GM Specialist
24/03/2022Q: What is the recommended bolt torque for the trailing arm to knuckle bolts?
A:
The recommended bolt torque is 110 Nm (81 LB-FT).
By Omar
GM Specialist
18/03/2022Q: What special tools will I be needing when servicing the Steering Knuckle?
A:
You will need a Universal Steering Linkage Puller.
By Omar
GM Specialist
17/03/2022Q: What will need to be done before servicing the vehicle?
A:
You will need to lift and support the vehicle.
By Bob
GM Specialist
17/03/2022Q: What will need to be removed to access the steering knuckle?
A:
You will need to remove the tire and wheel assembly.
By Bob
GM Specialist
16/03/2022See more FAQs (1)