< Back ×
2007 GMC Sierra 3500 Classic Driveshaft
My Vehicle Change Vehicle
2007 GMC Sierra 3500 Classic
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
$1137.27Product Specifications- Drive Shaft Diameter (In): 3.5 In.
- Drive Shaft Wall Thickness (In): 0.083 In.
- Greaseable Drive Shaft: Yes
- Length: 94"
- Material: Steel
- OE Part Number: 25776613
- Outside Diameter: 3.5"
- Overall Length Adjustable: Yes
- Transmission Type: Automatic
- UPC: 885484621299
- Wall Thickness: 0.083"
- Part Description: 2007 GMC Sierra 3500 Classic OE Solutions Rear Driveshaft
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | All Trims | All Engines
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2007 GMC Sierra 3500 Classic
PartNumber: 65-9518$351.16Product Specifications- Notes: with 37-5/8" (955 mm) Long Driveshaft;Measurement is taken from end of input shaft to center of U-Joint
- Greasable: Yes
- Length: 37.625"
- Length (mm): 955
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2007 GMC Sierra 3500 Classic Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | All Trims | All Engines
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2007 GMC Sierra 3500 Classic
PartNumber: 65-9520$558.80Product Specifications- Notes: with 38-5/8" (981 mm) Long Driveshaft;Supplied as new; Measurement is taken from end of input shaft to center of U-Joint
- Greasable: No
- Length: 38.625"
- Length (mm): 981
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2007 GMC Sierra 3500 Classic Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | All Trims | All Engines
$211.56 MSRP:$350.16You Save: $138.60 (40%)Product Specifications- Notes: 4WD, Clutch
- Other Names: Inner Shaft, Output Shaft, Shaft
- Item Dimensions: 7.0 x 4.6 x 4.6 inches
- Item Weight: 2.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15588366, 12479219, 15801502
- Part Description: 2007 GMC Sierra 3500 Classic Inner Shaft
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
$213.29 MSRP:$353.04You Save: $139.75 (40%)Product Specifications- Notes: All Models; 1/2 Ton; All; 9.25 Ring Gear;All Models; 3/4, 1 Ton
- Other Names: Inner Shaft, Pinion Shaft, Shaft
- Item Dimensions: 8.8 x 3.9 x 3.5 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15521907
- Part Description: 2007 GMC Sierra 3500 Classic Inner Shaft
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
$351.70 MSRP:$573.25You Save: $221.55 (39%)Product Specifications- Other Names: Axle Assembly, Axle Shaft Assembly
- Item Dimensions: 27.8 x 6.9 x 7.5 inches
- Item Weight: 28.10 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 85775028
- Part Description: 2007 GMC Sierra 3500 Classic Front Wheel Drive Shaft Assembly
$356.09 MSRP:$589.37You Save: $233.28 (40%)Product Specifications- Notes: 4WD, 3/4, 1 Ton; All Models; Right; 3/4, 1 Ton
- Location: Passenger Side
- Other Names: Axle Shaft, Inner Shaft, Output Shaft
- Item Dimensions: 21.8 x 7.7 x 7.5 inches
- Item Weight: 9.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26058829
- Part Description: 2007 GMC Sierra 3500 Classic Inner Shaft
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
$608.51 MSRP:$991.81You Save: $383.30 (39%)Product Specifications- Notes: All Models; 8.50, 8.625
- Other Names: Axle Shaft
- Item Dimensions: 35.9 x 7.5 x 7.7 inches
- Item Weight: 21.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 GMC Sierra 3500 Classic Rear Axle Drive Shaft
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
$304.38 MSRP:$612.46You Save: $308.08 (51%)Product Specifications- Notes: All Models; 3/4 Ton & 1 Ton; Auto Trans; 4 Speed - 4l80e (mt1)
- Other Names: Drive Shaft
- Fitment Type: Direct Replacement
- Replaces: 15182098, 84060396, 15090195, 15719954
- Part Description: 2007 GMC Sierra 3500 Classic Drive Shaft
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
Product Specifications- Notes: 10.50" Ring Gear; All Models; 10.50; Right
- Location: Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 40.8 x 8.4 x 8.5 inches
- Item Weight: 19.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 GMC Sierra 3500 Classic Rear Axle Drive Shaft
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
Product Specifications- Notes: 4WD, 3/4, 1 Ton; All Models; Left; 3/4, 1 Ton
- Location: Driver Side
- Other Names: Axle Shaft, Inner Shaft, Output Shaft
- Item Dimensions: 7.9 x 7.0 x 6.8 inches
- Item Weight: 6.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26059714
- Part Description: 2007 GMC Sierra 3500 Classic Front Drive Axle Inner Shaft
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Product Specifications
- Notes: All Models; 3/4 Ton & 1 Ton; Auto Trans; 6 Speed - Allison (mw7)
- Other Names: Drive Shaft
- Item Dimensions: 40.7 x 3.9 x 4.0 inches
- Item Weight: 17.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 GMC Sierra 3500 Classic Front Axle Propeller Shaft Assembly
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
Product Specifications- Notes: All Models; Right; 1/2 Ton; W/Silverado, Sierra; Crew Cab; 134" Wheelbase
- Other Names: Inner Shaft, Output Shaft
- Item Dimensions: 23.6 x 10.0 x 8.9 inches
- Item Weight: 9.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 GMC Sierra 3500 Classic Front Drive Axle Inner Shaft (Rh)
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
Product Specifications- Notes: All Models; 11.50; W/O Wide Axle
- Other Names: Axle Shaft
- Item Dimensions: 38.1 x 4.5 x 4.5 inches
- Item Weight: 17.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 GMC Sierra 3500 Classic Axle Shafts
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
Product Specifications- Notes: 8.50" & 8.625" Ring Gear, W/O Quadrasteer; All Models; 9.50; All
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 33.7 x 8.3 x 8.0 inches
- Item Weight: 27.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 GMC Sierra 3500 Classic Rear Axle Drive Shaft
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
Product Specifications- Notes: 11.50" Ring Gear; All Models; 11.50; W/Wide Axle
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 41.7 x 4.6 x 4.7 inches
- Item Weight: 19.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 GMC Sierra 3500 Classic Shaft, Rear Axle
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Product Specifications
- Notes: 10.50" Ring Gear; All Models; 10.50; Left
- Location: Driver Side
- Other Names: Axle Shaft
- Item Dimensions: 35.4 x 4.7 x 4.6 inches
- Item Weight: 16.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 GMC Sierra 3500 Classic Shaft, Rear Axle (LH)
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Product Specifications
- Notes: All Models; 3/4 Ton & 1 Ton; Manual Trans; 5 Speed (mw3)
- Other Names: Drive Shaft
- Item Dimensions: 28.7 x 4.7 x 4.7 inches
- Item Weight: 15.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 GMC Sierra 3500 Classic Front Axle Propeller Shaft Assembly
Vehicle Fitment- 2007 GMC Sierra 3500 Classic | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
FAQ for Driveshaft Repair
Q: What is the preliminary procedure for servicing the propeller shaft boot?
A:
The procedure is to remove the rear propeller shaft.
By Bob
GM Specialist
29/10/2022Q: What should be noticed before removing the two-piece propeller shaft?
A:
You shall observe and accurately reference mark all driveline components relative to the propeller shaft and axles before disassembly. All components must be reassembled in the exact relationship to each other as they were when removed. In addition, published specifications and torque values, as well as any measurements made before disassembly must be followed.
By Bob
GM Specialist
29/10/2022Q: What kind of tools will be required in the replacement of the two-piece propeller shaft?
A:
The tools required include J 43218 Clamp Pliers-Narrow Jaw.
By Bob
GM Specialist
29/10/2022Q: What kind of tools will be required while servicing the boot clamp?
A:
The tool is J43218 Clamp Pliers.
By Bob
GM Specialist
29/10/2022Q: How to remove the one-piece propeller shaft?
A:
The proper way is to remove the bolts and the yoke retainers from the rear axle pinion yoke, slide the propeller shaft forward and rearward to disconnect the propeller shaft from the rear axle pinion yoke and the transmission or transfer case and remove the propeller shaft from the vehicle.
By Bob
GM Specialist
29/10/2022Q: How to remove the front propeller shaft?
A:
The proper way is to install the propeller shaft boot, the propeller shaft boot clamp, the propeller shaft splines into the transfer case output shaft, and the propeller shaft to the front axle pinion yoke.
By Bob
GM Specialist
29/10/2022Q: How to install the one-piece propeller shaft?
A:
You shall install the propeller shaft into the transmission or transfer case and to the rear axle pinion yoke, and install the yoke retainers and bolts.
By Bob
GM Specialist
29/10/2022See more FAQs (2)