< Back ×
My Vehicle Change Vehicle
2007 GMC Sierra 3500 HD
< Back to View All
Cigarette Lighters
- Department
- Prices
OEM (Genuine) 2007 GMC Sierra 3500 HD Lighter Housing
PartNumber: 25774623
Product Specifications- Notes: W/O Uplevel Slt Package; W/Uplevel Slt Package; W/O Denali; W/Denali; W/O Denali, 2003-07, Front;W/O Denali, 2003-07, Rear; W/Denali, 2003-07, Front; W/Denali, 2003-07, Rear; Split Bench Seat, Center Seat-W/Az3
- Item Dimensions: 2.8 x 1.5 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999477, 12450044, 01999477
- Part Description: 2007 GMC Sierra 3500 HD Lighter Housing
Vehicle Fitment- 2007 GMC Sierra 3500 HD | AT4, Base, Denali, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
$6.85 MSRP:$10.32You Save: $3.47 (34%)
OEM (Genuine) 2007 GMC Sierra 3500 HD Receptacle Asm, Cigarette Lighter
PartNumber: 25776667
Product Specifications- Notes: W/O Denali, 2003-07; W/Denali, 2003-07
- Item Dimensions: 2.8 x 1.6 x 1.2 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12450043
- Part Description: 2007 GMC Sierra 3500 HD Receptacle Asm, Cigarette Lighter
Vehicle Fitment- 2007 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$12.25 MSRP:$18.22You Save: $5.97 (33%)
OEM (Genuine) 2007 GMC Sierra 3500 HD Lighter Assembly
PartNumber: 11516141
Product Specifications- Notes: W/O Uplevel Slt Package; W/O Denali, 2003-07; W/Denali, 2003-07
- Other Names: Lighter, Lighter Assembly, Tray
- Item Dimensions: 2.4 x 1.4 x 0.9 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999434, 3534408, 14004942, 17057195, 344802, 90566933, 00344802, 01999434, 10025707, 03534408
- Part Description: 2007 GMC Sierra 3500 HD Lighter Assembly
Vehicle Fitment- 2007 GMC Sierra 3500 HD | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$8.97 MSRP:$12.87You Save: $3.90 (31%)
OEM (Genuine) 2007 GMC Sierra 3500 HD Lighter
PartNumber: 23202298
Product Specifications- Other Names: Lighter
- Item Dimensions: 2.3 x 1.4 x 1.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999433, 25617713, 10098576, 25600663, 01999433, 10060404, 11516146, 11516140
- Part Description: 2007 GMC Sierra 3500 HD Lighter
Vehicle Fitment- 2007 GMC Sierra 3500 HD | Denali, SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
FAQ for Cigarette Lighters Repair
Q: What is the removal procedure for the cigar lighter receptacle or 12-Volt accessory power receptacle?
A:
The procedure is to remove the auxiliary power outlet fuse from the fuse block and the receptacle.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the AFL/ECP connectors?
A:
The procedure is to turn the bolt counterclockwise to remove the connector from the component, locate the connector position assurance (CPA) on the top of the wire dress cover, slide the lever lock forward, disconnect the connector from the component, locate the dress cover locking tabs at the corners of the dress cover, release the rear lower half of the wireless cover, release the tabs, remove the nose piece and then gently pull the wire out of the back of the connector.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the JST connectors?
A:
The procedure is to remove the connector from the component, locate the two indents of the terminal position assurance (TPA) located on the bottom of the connector body, and use a small flat-blade tool to very carefully raise the TPA on both sides of the connector and gently pull the wire out of the back of the connector.
By Bob
GM Specialist
29/10/2022Q: What will I be needing when servicing the AFL/ECP connectors?
A:
You will be needing a terminal repair kit.
By Bob
GM Specialist
29/10/2022Q: What should be done for a short voltage in a circuit?
A:
You should set the rotary dial of the DMM, connect the positive lead of the DMM to one end of the circuit to be tested, connect the negative lead of the DMM to good ground and turn on the ignition and operate all accessories.
By Bob
GM Specialist
29/10/2022Q: How to install the cigar lighter receptacle or 12-Volt accessory power receptacle?
A:
You can route the connector through the retainer, align the accessory power receptacle retainer, install the retainer, connect the electrical connector, align the tabs, install the accessory power receptacle and then install the accessory power receptacle fuse.
By Bob
GM Specialist
29/10/2022Q: What special tool will I need when servicing the cigarette lighter?
A:
You will need a fused jumper wire.
By Bob
GM Specialist
29/10/2022Q: What is the repair procedure for the JST connectors?
A:
The procedure is to use the appropriate terminal and then follow the instructions in the J-38125.
By Bob
GM Specialist
29/10/2022Q: What kind of special tool will I need when servicing the auxiliary power outlet?
A:
You will need a cigar lighter socket remover.
By Bob
GM Specialist
29/10/2022Q: How to remove the cigar lighter receptacle or 12-Volt accessory power receptacle?
A:
You should remove the auxiliary power outlet fuse, the receptacle, and the plastic latches.
By Bob
GM Specialist
29/10/2022See more FAQs (7)