Part Description: 2007 GMC Sierra 3500 HD Inner Boot
More Info
Vehicle Fitment
2007 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$33.06MSRP: $54.75
You Save: $21.69 (40%)
FAQ for Cv Joint Boot Repair
Q: How to remove the wheel drive shaft inner joint and boot?
A:
You can remove the wheel drive shaft, the wheel drive shaft seal cover, the tripot housing, the small boot retaining clamp, the spacer ring, the tripot spider assembly, and the tripot boot.
By Bob
GM Specialist
01/11/2022
Q: How to remove the wheel drive shaft outer joint and boot?
A:
You can remove the wheel drive shaft, the wheel drive shaft seal cover, the first chrome alloy ball, the inner race, all traces of old grease and any contaminates.
By Bob
GM Specialist
01/11/2022
Q: How to install the wheel drive shaft inner joint and boot?
A:
You can install the tripot spider assembly, the spacer ring, the seal, and the top half of the J 36652-98 for the 1500 models or J 36652-1 for the 2500 and 3500 models.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the small seal clamp?
A:
The recommended torque is 136 N.m (100 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the front axle lubricant?
A:
You can remove the engine shield, clean the area around the front axle fill plug and the drain plug, remove the fill plug, remove the drain plug and then drain the fluid from the front Differential carrier assembly.
Q: How to remove the Rear Axle Shaft?
A:
You can remove the tire and wheel assembly, the rear cover and gasket, the pinion shaft locking bolt, the pinion shaft, the shaft part way, the brake drum, the C-lock, and the Axle Shaft from the housing.
Q: How to remove the Seals and Gaskets?
A:
You can remove the tire and wheel assembly, the rear axle housing cover, the axle shaft, the Axle Shaft Seal, and the bearing.