< Back ×
My Vehicle Change Vehicle
2007 GMC Sierra 3500 HD
< Back to View All
Fuel Systems
- Department
- Brands
- Prices
OEM (Genuine) 2007 GMC Sierra 3500 HD Sensor, Fuel Tank Pressure
PartNumber: 16238399
Product Specifications- Notes: Gas, W/O Flex Fuel; Gas
- Item Dimensions: 3.2 x 2.1 x 2.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22678829, 09377680, 12219388, 16196060, 9377680, 12206740, 16217059, 16257276
- Part Description: 2007 GMC Sierra 3500 HD Sensor, Fuel Tank Pressure
Vehicle Fitment- 2007 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.0 L GAS
$46.84 MSRP:$98.40You Save: $51.56 (53%)
Dorman® Fuel Injection Pressure Regulator for 2007 GMC Sierra 3500 HD
PartNumber: 904-575Product Specifications- Adjustable Fuel Pressure: No
- Boost / Vacuum Reference Port: No
- Compatible Fuel System Style: Common Rail
- Gauge Port: Yes
- Inlet Attachment Type: Female Threads
- Inlet Port Diameter: 0.12''
- Inlet Quantity: 1
- Inlet Type: Non-Flanged
- Installation Hardware Included: No
- Item Grade: Standard Replacement
- Material: Metal
- Maximum Pressure Reading: 50 PSI
- OE Part Number: 97384667
- Outlet Attachment Type: Bolt On
- Outlet Port Diameter: 0.093''
- Outlet Quantity: 4
- Outlet Type: Non-Flanged
- UPC: 889245130532
- Part Description: 2007 GMC Sierra 3500 HD Fuel Injection Pressure Regulator
Vehicle Fitment- 2007 GMC Sierra 3500 HD | All Trims | 8 Cyl 6.6L
$120.36
OEM (Genuine) 2007 GMC Sierra 3500 HD Fuel Pressure Regulator
PartNumber: 97384667
Product Specifications- Notes: Silverado, Sierra; 6.6L
- Other Names: Fuel Pressure Regulator
- Item Dimensions: 6.3 x 6.2 x 6.1 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 GMC Sierra 3500 HD Fuel Pressure Regulator
Vehicle Fitment- 2007 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
$299.64 MSRP:$475.76You Save: $176.12 (38%)
FAQ for Fuel Pressure Regulator Repair
Q: How to install the Fuel Rail and Injectors?
A:
You can install the O-ring seals to the fuel injectors, the fuel injectors and retainers, the fuel rail assembly, the fuel rail bolts, the evaporative emission (EVAP) canister purge solenoid valve, the tubes, and the fuel rail stop bracket and bolt.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fuel rail stop bracket and bolt?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the fuel injection fuel rail crossover tube?
A:
You can remove the air cleaner outlet duct, the engine wiring harness bracket nut, the connector position assurance (CPA) retainer, the CPA retainer, the engine wiring harness clip, the negative battery cable stud, the negative battery cable terminal and engine wiring harness ground terminal, the engine wiring harness clip bolt, the fuel rail crossover pipe retainer screws, the fuel rail crossover pipe retainers, the fuel rail crossover pipe, and the fuel rail crossover pipe O-ring seals.
By Bob
GM Specialist
01/11/2022Q: What should be noted for the Fuel Rail Stop Bracket?
A:
The fuel rail stop bracket must be installed onto the engine assembly. The stop bracket serves as a protective shield for the fuel rail in the event of a vehicle frontal crash. If the fuel rail stop bracket is not installed and the vehicle is involved in a frontal crash, fuel could be sprayed possibly causing a fire and personal injury from burns.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fuel rail bolts?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the fuel injection fuel rail assembly?
A:
You can remove the air cleaner outlet duct, remove the engine wiring harness bracket nut, disconnect the engine wiring harness electrical connector from the evaporative emission (EVAP) purge solenoid, disconnect the engine wiring harness electrical connector from the generator and then disconnect the engine wiring harness electrical connector from the manifold absolute pressure (MAP) sensor.
By Bob
GM Specialist
01/11/2022Q: How to service the fuel pressure relief?
A:
You can remove the fuel pump fuse, loosen the fuel fill cap, remove the engine cover, remove the fuel rail service port cap, wrap a shop towel around the fuel rail service port, remove the shop towel, install the fuel rail service port cap, install the engine cover and then tighten the fuel fill cap.
By Bob
GM Specialist
29/10/2022See more FAQs (2)