< Back ×
2007 GMC Sierra 3500 HD HVAC Control Module
My Vehicle Change Vehicle
2007 GMC Sierra 3500 HD
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
Product Specifications- Notes: New; w/Auto AC Controls; Auto Configuration Software; New
- Automatic Temperature Control: Yes
- Connector Gender: Female
- Connector Quantity: 2
- Control Type: Automatic
- Housing Color: Black
- Instruction Manual Included: Yes
- Mounting Hardware Included: No
- Mounting Type: Bolt On
- OE Part Number: 10367041, 15133519, 15192450, 15214766, 15832314, 15832316, 15855848, 21997426, 21997427, 10367042, 15105215, 15107730, 15137655, 15185639, 15195564, 15201969, 15222482, 15763065, 15832318, 15855849, 15814152, 15203179, 15220310, 15220319, 10399657, 15105
- Pin Count: 24; 12
- Programming Required: No
- Terminal Gender: Male
- Terminal Quantity: 36
- Terminal Type: Pin
- UPC: 194883000032
- Wire Harness Included: No
- Part Description: 2007 GMC Sierra 3500 HD Hvac Control Module
Vehicle Fitment- 2007 GMC Sierra 3500 HD | All Trims | All Engines
OEM (Genuine) 2007 GMC Sierra 3500 HD AC Relay
PartNumber: 13500114$11.55 MSRP:$20.88You Save: $9.33 (45%)Product Specifications- Notes: Engine Compartment, Headlamp;Engine Compartment, Pcm;Engine Compartment, Rear Defogger;Engine Compartment, Starter; Silverado, Sierra; Daytime Running Lamp; Headlamp; Fog Lamp; AC Compressor; Horn; Fuel Pump
- Item Dimensions: 3.8 x 2.2 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12193606, 19115080, 15328866, 12135034, 15393412, 12088567, 12135170, 19116057
- Part Description: 2007 GMC Sierra 3500 HD AC Relay
Vehicle Fitment- 2007 GMC Sierra 3500 HD | AT4, Base, Denali, Denali Ultimate, Pro, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
FAQ for Hvac Control Module Repair
Q: How many screws attach to the blower motor control module?
A:
There are 2 screws attaching the blower motor control module.
By Bob
GM Specialist
01/11/2022Q: How many screws attach to the control assembly - heater and air conditioning?
A:
There are 2 screws attaching the control assembly - heater and air conditioning.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the HVAC control module screws?
A:
The recommended torque is 1.5 N.m (12 lb in).
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the blower motor control module?
A:
You should remove the instrument panel (I/P) insulator panel and then disconnect the blower motor control module electrical connector.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Heating Ventilation and Air Conditioning (HVAC) control module?
A:
You should remove the instrument panel (I/P) accessory trim plate and then disconnect the electrical connectors.
By Bob
GM Specialist
01/11/2022Q: How many screws attach to the HVAC Control Module?
A:
There are 2 screws attaching the HVAC Control Module.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the control assembly - heater and air conditioning screws?
A:
The recommended torque is 1.5 N.m (13 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the blower motor control module screws?
A:
The recommended torque is 1.5 N.m (13 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (3)