< Back ×
My Vehicle Change Vehicle
2007 GMC Sierra 3500 HD
< Back to View All
Air Filters & Intake Systems
- Department
- Brands
- Prices
OEM (Genuine) 2007 GMC Sierra 3500 HD Manifold
PartNumber: 12580420
Product Specifications- Notes: Silverado, Sierra; 6.0L
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 28.8 x 18.8 x 12.5 inches
- Item Weight: 17.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 GMC Sierra 3500 HD Manifold
Vehicle Fitment- 2007 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.0 L GAS
$185.36 MSRP:$295.65You Save: $110.29 (38%)
Dorman® Aluminum Intake Manifold for 2007 GMC Sierra 3500 HD
PartNumber: 615-621Product Specifications- Air Conditioning Compressor Mount: No
- Alternator Mount: No
- Center Maximum Height: 5"
- Color: Aluminum
- EGR Ready: No
- Front Maximum Height: 9"
- Gasket or Seal Included: No
- Grade Type: Regular
- Heated Choke Port: No
- Height: 9"
- High-Riser: No
- Intake Manifold Material: Aluminum
- Length: 9"
- Manifold Height: 9"
- Material: Aluminum
- Mount Hole Diameter: 0.26"
- Mounting Holes: 2
- OE Part Number: 97363568, 12628282
- Port Outlet Dimensions: 2.36"
- Port Quantity: 1
- Rear Maximum Height: 2"
- UPC: 889245130976
- Width: 5"
- Part Description: 2007 GMC Sierra 3500 HD Aluminum Intake Manifold
Vehicle Fitment- 2007 GMC Sierra 3500 HD | All Trims | 8 Cyl 6.6L
$122.74
OEM (Genuine) 2007 GMC Sierra 3500 HD Manifold
PartNumber: 97363572
Product Specifications- Notes: Silverado, Sierra; 6.6L; Right
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 33.0 x 5.9 x 5.6 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 GMC Sierra 3500 HD Manifold
Vehicle Fitment- 2007 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
$86.04 MSRP:$136.61You Save: $50.57 (38%)
OEM (Genuine) 2007 GMC Sierra 3500 HD Manifold
PartNumber: 97363571
Product Specifications- Notes: Silverado, Sierra; 6.6L; Left
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 32.1 x 5.8 x 5.6 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 GMC Sierra 3500 HD Manifold
Vehicle Fitment- 2007 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
$89.27 MSRP:$141.75You Save: $52.48 (38%)
FAQ for Intake Manifold Repair
Q: What is the recommended torque for the new washer and the oil pressure sensor?
A:
The recommended torque is 35 N.m (26 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the intake manifold sight shield retainer bolts?
A:
The recommended torque is 5 N.m (44 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Intake Manifold?
A:
You should remove the air cleaner outlet duct, the generator, the engine harness retainer nut, the engine harness retainer from the stud and locator, the connector position assurance (CPA) retainer, the engine harness clip, the CPA retainer, the engine harness clip, the engine harness clip bolt, the brake booster vacuum hose, the positive crankcase ventilation (PCV) hose, the intake manifold, the intake manifold gaskets, the brake booster vacuum hose, the upper intake manifold cover nut, the upper intake manifold cover, the manifold absolute pressure (MAP) sensor retainer, the MAP sensor, the evaporative emission (EVAP) tube and purge solenoid, the throttle body bolts/nuts, the throttle body, the throttle body gasket, the fuel rail bolts, the fuel rail, the fuel injector lower O-ring seals and the brake booster vacuum hose nipple.
By Bob
GM Specialist
01/11/2022Q: How to install the upper intake manifold sight shield?
A:
You should place the intake manifold sight shield, install the intake manifold sight shield retainer bolts, install the intake manifold sight shield tabs, align the intake manifold sight shield grommets and then push down on the intake manifold sight shield over the grommets.
By Bob
GM Specialist
01/11/2022Q: How to remove the upper intake manifold sight shield?
A:
You should open the hood, grasp the front of the intake manifold sight shield, disengage the grommets from the studs, remove the intake manifold sight shield and then remove the intake manifold sight shield retainer bolts and retainer.
By Bob
GM Specialist
01/11/2022Q: How to install the engine block valley cover?
A:
You should install a new washer and the oil pressure sensor, the O-ring seals, the engine valley cover bolts, and the intake manifold.
By Bob
GM Specialist
01/11/2022Q: How to remove the engine block valley cover?
A:
You should remove the intake manifold, the engine valley cover bolts, the engine valley cover and gasket, the O-ring seals, and the oil pressure sensor and washer.
By Bob
GM Specialist
01/11/2022Q: How to remove the Upper Intake Manifold Cover?
A:
You should remove the intake manifold, the brake booster vacuum hose from the intake manifold nipple, the upper intake manifold cover nut, and the upper intake manifold cover.
By Bob
GM Specialist
01/11/2022Q: How to install the upper intake manifold cover?
A:
You should install the upper intake manifold cover, the upper intake manifold cover nut, the brake booster vacuum hose, and the intake manifold.
By Bob
GM Specialist
01/11/2022See more FAQs (4)