2007 GMC Sierra 3500 HD Ring And Pinion

The recommended torque is 165 N.m (122 LB-FT).

You can install the inner pinion bearing cup into the pinion gear, the outer pinion, the inner pinion, a new collapsible spacer, the pinion, the outer pinion, a new pinion oil seal, the pinion yoke, the washer, a new pinion nut, the pinion gear bearing retainer, the propeller shaft, the propeller shaft yoke retaining clamps, the bolts, and the axle shafts.

You should install the ring gear to the differential case, the new ring gear bolts, the pinion bearing cups, the selective shim, the inner pinion bearing to the pinion, a new collapsible spacer, the outer pinion bearing into the axle housing, the new pinion oil seal, the pinion into the axle housing, the pinion yoke, and the differential assembly.

You can remove the axle shafts, the pinion gear bearing retainer bolts, the pinion gear bearing retainer and the pinion, the selective shim, the pinion nut, the washer, the pinion yoke, the pinion oil seal, the outer pinion bearing, the pinion, the collapsible spacer, the inner pinion bearing from the pinion, the outer pinion bearing cup, and the inner pinion bearing cup.

You should install the ring gear to the differential case, the new ring gear bolts, the pinion bearing cups, the selective shim, the inner pinion bearing to the pinion, a new collapsible spacer, the outer pinion bearing into the axle housing, the new pinion oil seal, the pinion into the axle housing, the pinion yoke, and the differential assembly.