< Back ×
2008 Buick Enclave Air Temperature Sensor
My Vehicle Change Vehicle
2008 Buick Enclave
< Back to View All
A/C & Heating
- Department
- Prices
$5.51 MSRP:$10.38You Save: $4.87 (47%)Product Specifications- Notes: Enclave, Traverse
- Item Dimensions: 2.1 x 1.8 x 1.0 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10396844
- Part Description: 2008 Buick Enclave AC Temperature Sensor
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
$25.04 MSRP:$45.55You Save: $20.51 (46%)Product Specifications- Notes: Floor Air; Front
- Location: Driver Side; Passenger Side
- Other Names: Air Temperature Sensor, Temperature Sensor
- Item Dimensions: 2.1 x 1.0 x 1.0 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Enclave Air Temperature Sensor
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
FAQ for Air Temperature Sensor Repair
Q: What will need to be done before replacing the Air Temperature Sensor-Lower Right Side?
A:
You will need to remove the front floor console extension panel-right side and the instrument panel insulator-right side.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Air Temperature Sensor-Upper Left?
A:
You can disconnect the electrical connector, and then grasp and pull the sensor straight downward from the air duct.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Air Temperature Sensor-Upper Right?
A:
You can disconnect the electrical connector, and then grasp and pull the sensor straight downward from the air duct.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Air Temperature Sensor-Lower Right?
A:
You need to disconnect the electrical connector and grasp and pull the sensor straight outward from the HVAC case.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Mass Airflow Sensor/Intake Air Temperature Sensor?
A:
You need to remove the air cleaner outlet duct, disconnect the engine wiring harness electrical connector from the mass airflow (MAF)/intake air temperature (IAT) sensor, and then remove the MAF/IAT sensor screws, the MAF/IAT sensor from the air cleaner assembly and the MAF/IAT sensor seal.
By Bob
GM Specialist
01/11/2022Q: How do you install the Mass Airflow Sensor/Intake Air Temperature Sensor?
A:
You need to install the MAF/IAT sensor seal onto the MAF/IAT sensor, the MAF/IAT sensor to the air cleaner assembly and the MAF/IAT sensor screws, connect the engine wiring harness electrical connector to the MAF/IAT sensor, and then install the air cleaner outlet duct.
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the ambient air temperature sensor?
A:
You will need to remove the front compartment sight shield.
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Air Temperature Sensor-Lower Left Side?
A:
You will need to remove the front floor console extension panel-left side.
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Air Temperature Sensor-Upper Left Side?
A:
You will need to remove the Steering Column Opening Filler.
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Air Temperature Sensor-Upper Right Side?
A:
You will need to remove the I/P compartment.
By Bob
GM Specialist
01/11/2022See more FAQs (7)