< Back ×
2008 Buick Enclave Power Steering Hose
My Vehicle Change Vehicle
2008 Buick Enclave
< Back to View All
Power Steering Lines & Hoses
- Department
- Brands
- Prices
OEM (Genuine) 2008 Buick Enclave Lower Return Line
PartNumber: 22915139$63.45 MSRP:$105.05You Save: $41.60 (40%)Product Specifications- Notes: Enclave, Traverse; Gear Outlet
- Other Names: Lower Return Line, Power Steering Return Hose
- Item Dimensions: 34.2 x 13.5 x 9.5 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Enclave Lower Return Line
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
Product Specifications- Notes: Cut to Length, 6"; Cut to fit;Cut to Length, 3"; Cut to fit
- Inside Diameter: 3/4"
- Length: 120"
- Material: Rubber
- UPC: 072053418859
- Part Description: 2008 Buick Enclave Bulk Power Steering Bulk Hose
Vehicle Fitment- 2008 Buick Enclave | All Trims | 6 Cyl 3.6L
OEM (Genuine) 2008 Buick Enclave Lower Return Tube
PartNumber: 22915138$39.23 MSRP:$64.95You Save: $25.72 (40%)Product Specifications- Other Names: Lower Return Tube, Return Hose
- Item Dimensions: 25.2 x 7.2 x 5.4 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25876164, 25840979, 15869853
- Part Description: 2008 Buick Enclave Lower Return Tube
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
OEM (Genuine) 2008 Buick Enclave Pipe Kit
PartNumber: 20887540$46.90 MSRP:$77.64You Save: $30.74 (40%)Product Specifications- Other Names: Pipe Kit
- Item Dimensions: 22.2 x 6.0 x 5.9 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15948976
- Part Description: 2008 Buick Enclave Pipe Kit
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
OEM (Genuine) 2008 Buick Enclave Reservoir Hose
PartNumber: 19259475$17.79 MSRP:$28.35You Save: $10.56 (38%)Product Specifications- Notes: Enclave, Traverse; Reservoir Inlet
- Other Names: Power Steering Return Hose, Reservoir Hose
- Item Dimensions: 26.9 x 2.1 x 1.2 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25792763
- Part Description: 2008 Buick Enclave Reservoir Hose
Vehicle Fitment- 2008 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
OEM (Genuine) 2008 Buick Enclave Hose Asm-P/S Gear Inlet
PartNumber: 22912855$164.03 MSRP:$271.49You Save: $107.46 (40%)Product Specifications- Other Names: Power Steering Pressure Hose, Pressure Hose
- Item Dimensions: 4.7 x 22.6 x 10.5 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19540418
- Part Description: 2008 Buick Enclave Hose Asm-P/S Gear Inlet
Gates® Power Steering Return Line Hose Assembly Cooler To Reservoir for 2008 Buick Enclave
PartNumber: 352281Product Specifications- Notes: Cut to Length, 27"; Cut to fit
- End 1 Diameter: 0.375"
- End 1 Type: I.D. Hose
- Length: 37"
- UPC: 770075666301
- Part Description: 2008 Buick Enclave Power Steering Return Line Hose Assembly Cooler To Reservoir
Vehicle Fitment- 2008 Buick Enclave | All Trims | 6 Cyl 3.6L
Product Specifications- Notes: Cut to Length, 3"; Cut to fit;Cut to Length, 6"; Cut to fit
- Inside Diameter: 3/4"
- Length: 36"
- Material: Rubber
- UPC: 072053426939
- Part Description: 2008 Buick Enclave Bulk Power Steering Bulk Hose
Vehicle Fitment- 2008 Buick Enclave | All Trims | 6 Cyl 3.6L
Gates® Power Steering Return Line Hose Assembly Pipe To Cooler for 2008 Buick Enclave
PartNumber: 366263Product Specifications- End 1 Diameter: 0.375"
- End 1 Type: Beaded Tube
- End 2 Type: I.D. Hose
- Length: 34"
- UPC: 770075689195
- Part Description: 2008 Buick Enclave Power Steering Return Line Hose Assembly Pipe To Cooler
Vehicle Fitment- 2008 Buick Enclave | All Trims | 6 Cyl 3.6L
Gates® Power Steering Return Line Hose Assembly Gear To Pipe for 2008 Buick Enclave
PartNumber: 365865Product Specifications- End 1 Diameter: 11 mm
- End 1 Type: Male Captive O-Ring
- End 2 Diameter: 0.375"
- End 2 Type: I.D. Hose
- Length: 62.5"
- UPC: 770075547723
- Part Description: 2008 Buick Enclave Power Steering Return Line Hose Assembly Gear To Pipe
Vehicle Fitment- 2008 Buick Enclave | All Trims | 6 Cyl 3.6L
Product Specifications- End 1 Diameter: 11 mm
- End 1 Type: Male Captive O-Ring
- End 2 Diameter: 16 mm
- End 2 Diameter (mm): 16 mm
- End 2 Type: Male O-Ring
- Length: 54.5"
- Switch Port: Without Switch Port
- UPC: 770075546610
- Part Description: 2008 Buick Enclave Power Steering Pressure Line Hose Assembly
Vehicle Fitment- 2008 Buick Enclave | All Trims | 6 Cyl 3.6L
Product Specifications- Notes: Enclave, Traverse; Reservoir Outlet
- Other Names: Power Steering Pressure Hose, Suction Hose
- Item Dimensions: 22.3 x 11.9 x 3.3 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Enclave Hose Asm-P/S Gear Inlet
Vehicle Fitment- 2008 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
FAQ for Power Steering Hose Repair
Q: How do you install the Power Steering Cooler Pipe/Hose?
A:
You need to install the power steering cooler pipe to the vehicle and a new power steering cooler pipe clamp, connect the power steering cooler pipe to the power steering gear outlet hose, install the power steering gear outlet hose bracket bolt, connect the power steering cooler pipe to the power steering fluid cooler and tighten the power steering cooler pipe clamp, clean any excess fluid from the vehicle and remove the drain pans, install the right front frontwards wheelhouse liner, and then fill and bleed the power steering system.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Power Steering Cooler Pipe/Hose?
A:
You need to remove the right front frontwards wheelhouse liner, place drain pans under the vehicle as needed, loosen the power steering cooler pipe clamp and disconnect the power steering cooler pipe from the power steering fluid cooler, remove the power steering gear outlet hose bracket bolt and the power steering gear outlet hose clamp, disconnect the power steering cooler pipe from the power steering gear outlet hose, and then remove any plastic retaining clips on the power steering cooler pipe and discard them and the power steering cooler pipe from the vehicle.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Power Steering Reservoir Inlet Pipe/Hose clamps?
A:
You can remove as much power steering fluid from the remote power steering fluid reservoir as possible, and then place drain pans under the vehicle as needed.
By Bob
GM Specialist
02/11/2022Q: What are the recommended torque for the power steering gear inlet and outlet pipe clip bolt?
A:
The recommended torque is 8 N.m (71 lb in).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the power steering gear outlet hose bracket bolt?
A:
The recommended torque is 8 N.m (71 lb in).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the left and right front frame reinforcement mounting bolts?
A:
The recommended torque is 50 N.m (37 lb in).
By Bob
GM Specialist
02/11/2022Q: How do you install the Power Steering Fluid Reservoir Outlet Hose?
A:
You need to install the power steering fluid reservoir outlet hose to the vehicle, connect the power steering fluid reservoir outlet hose to the power steering pump and the power steering fluid reservoir outlet hose to the remote power steering fluid reservoir, clean all excess fluid from the vehicle and remove the drain pans, fill and bleed the power steering system, and then install the fuel injector sight shield.
By Bob
GM Specialist
02/11/2022Q: What will need to be done before replacing the Power Steering Reservoir Inlet Pipe/Hose?
A:
You will need to remove the fuel injector sight shield.
By Bob
GM Specialist
02/11/2022Q: What will need to be cautioned when starting the vehicle?
A:
You will need to avoid starting the vehicle with any power steering gear inlet or outlet hoses disconnected, which could result in contamination or loss of power steering fluid and damage to the system.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Power Steering Fluid Reservoir Outlet Hose?
A:
You need to remove the fuel injector sight shield and as much power steering fluid from the remote power steering fluid reservoir as possible, place drain pans under the vehicle as needed, disconnect the power steering fluid reservoir outlet hose from the remote power steering fluid reservoir and the power steering fluid reservoir outlet hose from the power steering pump, and then remove the power steering fluid reservoir outlet hose from the vehicle.
By Bob
GM Specialist
02/11/2022See more FAQs (7)