< Back ×
My Vehicle Change Vehicle
2008 Buick Enclave
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Brands
- Prices
OEM (Genuine) 2008 Buick Enclave Control Valve Solenoid
PartNumber: 12636175
Product Specifications- Notes: Enclave, Traverse
- Item Dimensions: 6.3 x 3.1 x 3.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12588943, 12626012, 12615613
- Part Description: 2008 Buick Enclave Control Valve Solenoid
Vehicle Fitment- 2008 Buick Enclave | Avenir, Base, Convenience, CX, CXL, Essence, Leather, Preferred, Premium | 6 Cyl 3.6 L GAS
$50.89 MSRP:$75.96You Save: $25.07 (34%)
Dorman® OE Solutions Driver Side Variable Valve Timing Solenoid for 2008 Buick Enclave
PartNumber: 917-219Product Specifications- Color: Silver/Zinc-Plated
- Components Included: VVT
- Electrical Connection Quantity: 1
- Electrical Connector Gender: Male
- Electrical Connector Terminal Quantity: 2
- Electrical Connector Terminal Type: Plug and Socket
- Electrical Connector Type: Plug and Socket
- Height: 2"
- Housing Material: Plastic
- Item Grade: Standard Replacement
- Overall Length: 5.6"
- Overall Width: 1.6"
- Plug/Connector Type: Plug and Socket
- Quantity of Wires: 2
- Shaft Diameter: 0.785"
- Solenoid Activation Type: Electromagnetic
- Solenoid Finish: Stainless Steel
- Terminal Gender: Female
- UPC: 019495448006
- Voltage: 12v
- Part Description: 2008 Buick Enclave OE Solutions Driver Side Variable Valve Timing Solenoid
Vehicle Fitment- 2008 Buick Enclave | All Trims | 6 Cyl 3.6L
$31.47
Gates® Lower Variable Valve Timing Solenoid for 2008 Buick Enclave
PartNumber: VVS185Product Specifications- Activation Style: Electromagnetic
- Connector Gender: Female
- Connector Quantity: 1
- Gasket/Seal Included: No
- Height: 0.953"
- Material: Steel
- Mounting Bolt Included: No
- Overall Length: 143
- Overall Width: 0.953"
- Shaft Diameter: 20
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Blade
- UPC: 770075706830
- Voltage (VAC): 12
- Part Description: 2008 Buick Enclave Lower Variable Valve Timing Solenoid
Vehicle Fitment- 2008 Buick Enclave | All Trims | 6 Cyl 3.6L
$31.38
Spectra Premium® Inner Variable Valve Timing Solenoid for 2008 Buick Enclave
PartNumber: VTS1011Product Specifications- UPC: 671607567236
- Part Description: 2008 Buick Enclave Inner Variable Valve Timing Solenoid
Vehicle Fitment- 2008 Buick Enclave | All Trims | All Engines
$30.24
Walker Products® Variable Timing Solenoid for 2008 Buick Enclave
PartNumber: 590-1021Product Specifications- Connector Color: Black
- Connector Gender: Female
- Connector Quantity: 1
- Connector Shape: Rectangular
- Housing Material: Metal
- Mounting Hole Quantity: 1
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Blade
- UPC: 724620111709
- Part Description: 2008 Buick Enclave Variable Timing Solenoid
Vehicle Fitment- 2008 Buick Enclave | All Trims | 6 Cyl 3.6L
$33.13
FAQ for Variable Timing Solenoid Repair
Q: How do you install the Camshaft Position Actuator Solenoid Valve Solenoid-Bank 2 (Left Side) Exhaust?
A:
You need to inspect the CMP actuator solenoid valve seal for damage, install the CMP actuator solenoid valve and bolt, connect the engine wiring harness electrical connector to the bank 2 exhaust CMP actuator solenoid valve, and then install the engine mount strut and bracket.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Camshaft Position Actuator Solenoid Valve Solenoid-Bank 2 (Left Side) Intake?
A:
You need to remove the engine mount strut bracket, the radiator inlet hose from the water outlet, and the power steering fluid reservoir bracket bolts, remove and reposition the power steering fluid reservoir bracket out of the way, disconnect the engine wiring harness electrical connector from the bank 2 intake camshaft position (CMP) actuator solenoid valve, remove the CMP actuator solenoid valve bolt and valve, and then inspect the CMP actuator solenoid valve seal for damage and replace as necessary.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Camshaft Position Actuator Solenoid Valve Solenoid-Bank 1 (Right Side) Intake?
A:
You need to remove the engine mount strut and bracket, disconnect the engine wiring harness electrical connector from the bank 1 intake camshaft position (CMP) actuator solenoid valve, remove the CMP actuator solenoid valve bolt and valve, and then inspect the CMP actuator solenoid valve seal and replace as necessary.
By Bob
GM Specialist
01/11/2022Q: How do you install the Camshaft Position Actuator Solenoid Valve Solenoid-Bank 1 (Right Side) Intake?
A:
You need to inspect the CMP actuator solenoid valve seal for damage, install the CMP actuator solenoid valve and bolt, connect the engine wiring harness electrical connector to the bank 1 intake CMP actuator solenoid valve, and then install the engine mount strut and bracket.
By Bob
GM Specialist
01/11/2022Q: How do you install the Camshaft Position Actuator Solenoid Valve Solenoid-Bank 1 (Right Side) Exhaust?
A:
You need to inspect the CMP actuator solenoid valve seal for damage, install the CMP actuator solenoid valve and bolt, connect the engine wiring harness electrical connector to the bank 1 exhaust CMP actuator solenoid valve, and then install the engine mount strut and bracket.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Camshaft Position Actuator Solenoid Valve Solenoid-Bank 1 (Right Side) Exhaust?
A:
You need to remove the engine mount strut and bracket, disconnect the engine wiring harness electrical connector from the bank 1 exhaust camshaft position (CMP) actuator solenoid valve, remove the CMP actuator solenoid valve bolt and valve, and then inspect the CMP actuator solenoid valve seal and replace as necessary.
By Bob
GM Specialist
01/11/2022Q: How do you install the Camshaft Position Actuator Solenoid Valve Solenoid-Bank 2 (Left Side) Intake?
A:
You need to inspect the CMP actuator solenoid valve seal for damage, install the CMP actuator solenoid valve and bolt, connect the engine wiring harness electrical connector to the bank 2 intake CMP actuator solenoid valve, position and install the power steering fluid reservoir bracket, and then install the power steering fluid reservoir bracket bolts, the radiator inlet hose to the water outlet and the engine mount strut bracket.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Camshaft Position Actuator Solenoid Valve Solenoid-Bank 2 (Left Side) Exhaust?
A:
You need to remove the engine mount strut and bracket, disconnect the engine wiring harness electrical connector from the bank 2 exhaust camshaft position (CMP) actuator solenoid valve, remove the CMP actuator solenoid valve bolt and valve, and then inspect the CMP actuator solenoid valve seal and replace as necessary.
By Bob
GM Specialist
01/11/2022See more FAQs (3)