< Back ×
My Vehicle Change Vehicle
2008 Buick Enclave
< Back to View All
Wipers & Washers
- Department
- Brands
- Prices
OEM (Genuine) 2008 Buick Enclave Wiper Motor
PartNumber: 20785187
Product Specifications- Notes: Enclave, Traverse
- Other Names: Front Motor, Front Washer Pump, Wiper Motor
- Item Dimensions: 9.4 x 6.2 x 5.1 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15942928, 25821246
- Part Description: 2008 Buick Enclave Wiper Motor
Vehicle Fitment- 2008 Buick Enclave | Base, CX, CXL | 6 Cyl 3.6 L GAS
$128.28 MSRP:$242.07You Save: $113.79 (48%)
Cardone Reman® Remanufactured Wiper Motor for 2008 Buick Enclave
PartNumber: 40-1070Product Specifications- Notes: Motor without Washer Pump
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Direct Bolt
- Package Contents: Wiper Motor, Instruction Manual
- Product Condition: Remanufactured
- Product Packing Weight: 3 lbs
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: 2008 Buick Enclave Remanufactured Wiper Motor
Vehicle Fitment- 2008 Buick Enclave | All Trims | All Engines
$128.47
OEM (Genuine) 2008 Buick Enclave Rear Motor
PartNumber: 25864153
Product Specifications- Notes: Enclave
- Other Names: Rear Motor, Wiper Motor
- Item Dimensions: 8.1 x 8.3 x 13.8 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25823359, 25795300
- Part Description: 2008 Buick Enclave Rear Motor
Vehicle Fitment- 2008 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
$128.03 MSRP:$232.80You Save: $104.77 (46%)
FAQ for Windshield Wiper Motors Repair
Q: What is the recommended torque for the Windshield Wiper Motor bolts?
A:
The recommended torque is 8.5 N.m (875 lb in).
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Air Inlet Grille Panel?
A:
You will need to remove both front wiper arm assembles and the remote battery ground stud from the passenger side air inlet grille panel, install the air inlet panel tab to the upper plenum and then position the rear tabs to the bottom edge of the windshield, the outer grille panel edge to the upper outer plenum, the retainers that secure the front of the air inlet panel to the plenum, and the attachments to both the right and left side fenders.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Rear Window Wiper Motor have?
A:
The Rear Window Wiper Motor has a total of 3 bolts.
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Rear Window Wiper Motor (Enclave)?
A:
You will need to remove the rear liftgate interior trim panel and the rear wiper arm assembly, and then disconnect the electrical connector to the rear window wiper motor.
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Windshield Wiper Motor?
A:
You will need to remove the windshield wiper transmission assembly.
By Bob
GM Specialist
01/11/2022Q: How many retainers does the Air Inlet Grille Panel have?
A:
The Air Inlet Grille Panel has a total of 4 retainers.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Rear Window Wiper Motor bolt?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How many bolts does the windshield wiper motor have?
A:
The windshield wiper motor has a total of 3 bolts.
By Bob
GM Specialist
01/11/2022See more FAQs (3)