< Back ×
My Vehicle Change Vehicle
2008 Buick Lucerne
< Back to View All
Alignment Kits
- Department
- Prices
OEM (Genuine) 2008 Buick Lucerne U-Bolt Nut
PartNumber: 11516382
Product Specifications- Item Dimensions: 4.2 x 3.0 x 0.7 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22123946, 15702050, 15048124, 14013439
- Part Description: 2008 Buick Lucerne U-Bolt Nut
Vehicle Fitment- 2008 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
$1.14 MSRP:$1.88You Save: $0.74 (40%)
OEM (Genuine) 2008 Buick Lucerne Bolt, Rear Suspension Support
PartNumber: 11588419
Product Specifications- Item Dimensions: 5.5 x 1.9 x 1.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25666108, 25630801, 11518694
- Part Description: 2008 Buick Lucerne Bolt, Rear Suspension Support
Vehicle Fitment- 2008 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
$13.06
OEM (Genuine) 2008 Buick Lucerne Adjust Bolt
PartNumber: 11519299
Product Specifications- Item Dimensions: 5.4 x 2.4 x 2.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25671630
- Part Description: 2008 Buick Lucerne Adjust Bolt
Vehicle Fitment- 2008 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Buick Lucerne Bolt/Screw-Rear Suspension Control Arm
PartNumber: 25604378
Product Specifications- Item Dimensions: 5.1 x 1.2 x 1.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Buick Lucerne Bolt/Screw-Rear Suspension Control Arm
Vehicle Fitment- 2008 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
FAQ for Camber and Alignment Kit Repair
Q: How do you align the wheel?
A:
You can install the alignment equipment, measure the alignment angles, and adjust the alignment angles.
By Bob
GM Specialist
01/11/2022Q: How do you adjust the front toe?
A:
You can loosen the lock nuts, rotate the inner tie rod, and adjust the boots.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to adjust the front camber?
A:
The proper way is to remove the nut, replace the strut, and perform a wheel alignment.
By Bob
GM Specialist
01/11/2022Q: What is the adjustment procedure for the rear toe?
A:
The procedure is to loosen the inner adjustment link cam, adjust the toe, and check the toe after tightening.
By Bob
GM Specialist
01/11/2022Q: What is a special tool needed for alignment?
A:
The special tool that is needed for alignment is the camber adjustment tool.
By Bob
GM Specialist
01/11/2022