< Back ×
My Vehicle Change Vehicle
2008 Cadillac CTS
< Back to View All
Hoods
- Department
- Prices
OEM (Genuine) 2008 Cadillac CTS Latch
PartNumber: 25885392
Product Specifications- Other Names: Latch, Lock
- Item Dimensions: 7.9 x 7.3 x 3.3 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: Latch
$150.97 MSRP:$227.76You Save: $76.79 (34%)
OEM (Genuine) 2008 Cadillac CTS Latch Assembly
PartNumber: 25869079
Product Specifications- Notes: W/O Remote Start
- Other Names: Latch Assembly, Lock
- Item Dimensions: 7.0 x 6.8 x 6.4 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15291415
- Part Description: Latch Assembly
$41.06 MSRP:$61.96You Save: $20.90 (34%)OEM (Genuine) 2008 Cadillac CTS Latch Assembly
PartNumber: 20761110
Product Specifications- Notes: W/Remote Start
- Other Names: Latch Assembly, Lock
- Item Dimensions: 6.8 x 6.4 x 6.6 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25869078, 15806537
- Part Description: Latch Assembly
$55.28 MSRP:$83.42You Save: $28.14 (34%)
FAQ for Hood Latch Repair
Q: What is the recommended torque for the Hood Primary and Secondary Latch Bolt?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Hood Hinge (RPO BRT)?
A:
You need to disable the SIR system and remove the hood.
By Bob
GM Specialist
01/11/2022Q: What will need to be done before the Hood Hinge Replacement (Standard)?
A:
You need to remove the hood.
By Bob
GM Specialist
01/11/2022Q: What will need to be done before the Hood Primary and Secondary Latch Replacement?
A:
You need to remove the front compartment sight shields.
By Bob
GM Specialist
01/11/2022Q: Under what conditions should you Ensure that you have the proper alignment of the hood to the body before you tighten the hood latch mounting fasteners?
A:
You should do so after removing the hood latch assembly, after loosening the mounting bolts, or after changing the hood adjustment.
By Bob
GM Specialist
01/11/2022Q: How to replace the Hood Primary and Secondary Latch?
A:
First, you need to disconnect the remote to start the electrical connector. Then, please disconnect the release cable from the hood latch by squeezing the cable retainer.
By Bob
GM Specialist
01/11/2022Q: How to adjust the Hood Latch?
A:
First, you need to use the hood latch attaching fasteners oose to lower the hood onto the latch in order to achieve the proper cross-vehicle adjustment of the hood latch. Then, please raise the hood. Finally, you should tighten the fasteners.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fasteners?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Hood Hinge Bolt?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: How to replace the Hood Hinge (RPO BRT)?
A:
First, you need to adjust the hood hinge. Then, you should place the left and right actuator, the left and right hinge-hood side, the left and right hinge-body side, hood.
By Bob
GM Specialist
01/11/2022See more FAQs (5)