< Back ×
My Vehicle Change Vehicle
2008 Cadillac CTS
< Back to View All
Power Steering Pumps
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Power Steering Pump w/o Reservoir for 2008 Cadillac CTS
PartNumber: 20-1003Product Specifications- Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir
- Hose Port: O-Ring
- Housing Material: Aluminum
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: Remanufactured Power Steering Pump w/o Reservoir
$157.25
Cardone Reman® Remanufactured Power Steering Pump w/o Reservoir for 2008 Cadillac CTS
PartNumber: 20-1002Product Specifications- Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir
- Hose Port: O-Ring
- Housing Material: Aluminum
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: Remanufactured Power Steering Pump w/o Reservoir
$84.40
OEM (Genuine) 2008 Cadillac CTS Pump Asm-P/S
PartNumber: 25914590
Product Specifications- Notes: CTS; W/O AWD
- Other Names: Power Steering Pump
- Item Dimensions: 8.1 x 5.7 x 5.7 inches
- Item Weight: 3.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: Pump Asm-P/S
OEM (Genuine) 2008 Cadillac CTS Pump Asm-P/S
PartNumber: 15224339
Product Specifications- Notes: Cts; CTS; W/AWD
- Other Names: Power Steering Pump
- Item Dimensions: 9.5 x 6.3 x 5.1 inches
- Item Weight: 3.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: Pump Asm-P/S
FAQ for Power Steering Pump Repair
Q: How to remove the Power Steering Pump Bracket?
A:
First, you need to remove the power steering pump. Then, please remove the power steering pump bolts. Finally, you should separate the power steering pump from the power steering pump bracket.
By Bob
GM Specialist
01/11/2022Q: How to remove the Power Steering Pump Pulley?
A:
First, you need to remove the air conditioning compressor and power steering pump belt from the power steering pump pulley. Then, please use remover J 25034-C to remove the power steering pump pulley.
By Bob
GM Specialist
01/11/2022Q: How to install the Power Steering Pump Bracket?
A:
First, you need to align the power steering pump to the power steering pump bracket. Then, please install the power steering pump bolts. Finally, you should install the power steering pump.
By Bob
GM Specialist
01/11/2022Q: How to install the Power Steering Pump?
A:
First, you need to position the power steering pump and bracket to the vehicle and install the power steering pump bracket bolts. Then, please connect the power steering gear inlet hose fitting to the power steering pump and connect the power steering fluid reservoir outlet hose to the power steering pump. Finally, you should clean any excess fluid from the vehicle and remove the drain pans, install the power steering pump pulley, and the front air deflector and fill and bleed the power steering system.
By Bob
GM Specialist
01/11/2022Q: What components are needed in the process of the Power Steering Pump Pulley Replacement?
A:
You need to use the J 25033-C Pulley Installer and the J 25034-C Pulley Remover.
By Bob
GM Specialist
01/11/2022Q: How to install the Power Steering Pump Pulley?
A:
First, you need to use installer J 25033-C to install the power steering pump pulley. Then, please ensure that the axial tolerance of the power steering pump pulley on the power steering pump is within 0.25 mm (0.010 in). Finally, you should install the air conditioning compressor and power steering pump belt to the power steering pump pulley.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power steering pump bolts?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Power Steering Pump?
A:
First, you need to remove the front air deflector, place drain pans under the vehicle as needed, remove as much power steering fluid from the remote power steering fluid reservoir as possible, and remove the power steering pump pulley. Then, please disconnect the power steering fluid reservoir outlet hose from the power steering pump and disconnect the power steering gear inlet hose fitting from the power steering pump. Finally, you should remove the power steering pump bracket bolts, and the power steering pump and bracket from the vehicle.
By Bob
GM Specialist
01/11/2022See more FAQs (3)