2008 Cadillac CTS Sway Bar Bushing

First, you need to install the park brake cable bracket, the Parking Brake Cable bracket nuts, and the park brake cable to the parking brake cable bracket. Then, please ensure the locking tabs are properly seated, connect the rear park brake cable to the park brake actuator lever, and connect the intermediate park brake cable connector to the front park brake cable. Finally, you should install the rear tire and wheel assembly and cycle the park brake pedal 1 to 2 times.

First, you need to remove the tire and wheel and remove the wheel bearing/hub. Then, please remove the outer tie rod to the Steering Knuckle and remove the brake hose bracket to the steering knuckle retaining bolts. Finally, you should remove the steering knuckle from the upper control arm and remove the steering knuckle lower from the control arm.

First, you need to remove the left-side engine splash shield, the intermediate Steering Shaft bolt, and the lower intermediate steering shaft bolt. Then, please disconnect the lower intermediate steering shaft from the steering gear, disconnect the intermediate steering shaft from the upper intermediate steering shaft and remove the lower intermediate steering shaft from the vehicle with the intermediate steering shaft still connected. Finally, you should remove the intermediate steering shaft bolt and disconnect the intermediate steering shaft from the lower intermediate steering shaft.